Development of Asynchronous Hotwire Cutting Simulation for Foam Pattern

Views : 0 下载量: 68 CSCD: 0

扫描看全文

[1]周饶,董选普,吴志超,吕中华,朱焜.泡沫模样异步热线切割仿真加工研究[J].特种铸造及有色合金,2016,36(06):574-576.

Zhou Rao, Dong Xuanpu, Wu Zhichao, et al. Development of Asynchronous Hotwire Cutting Simulation for Foam Pattern. [J]. Special Casting & Nonferrous Alloys 36(6):574-576(2016)
[1]周饶,董选普,吴志超,吕中华,朱焜.泡沫模样异步热线切割仿真加工研究[J].特种铸造及有色合金,2016,36(06):574-576. DOI： 10.15980/j.tzzz.2016.06.004.

Zhou Rao, Dong Xuanpu, Wu Zhichao, et al. Development of Asynchronous Hotwire Cutting Simulation for Foam Pattern. [J]. Special Casting & Nonferrous Alloys 36(6):574-576(2016) DOI： 10.15980/j.tzzz.2016.06.004.

在异步热线切割成型EPS模样技术中

由于传统二维CAD设计无法准确地描述三维实体

从而导致模型设计与加工存在偏差。利用Microsoft Visual Studio软件完成异步线切割加工装置的控制系统设计

基于Open GL实现三维模型仿真优化工艺

提高材料利用率以及加工效率

完成三维EPS模样加工。

In using asynchronous hotwire cutting with EPS foam

traditional 2DCAD methods were restricted due to that the shape of 3Dmodels couldn’t be depicted precisely by the curves

resulting in the deviation of design and real product.In order to overcome the problem

a control system based on Open GL and Microsoft Visual Studio software was developed

which could run 3Dsimulation and manufacture.With the help of the system

analysis of the process can be performed prior to manufacturing.Thus material can be used efficiently and efficiency can be enhanced.Finally

the experiment of processing the foam mould was completed with the new system.

EPS模样异步热线切割Open GL仿真

EPS PatternAsynchronous Hotwire CuttingOpen GL Simulation

Alert me when the article has been cited

提交