Development and Application of Vacuum Station and Chilling Exhaust Valve for Vacuum Die Casting

Xu Feiyue; Chen Jianhong; Wan Li; An Zhaoyong; Qi Jingfeng; Wu Weizhi; Zeng Qingjie

doi:10.15980/j.tzzz.2016.05.014

Views : 0 下载量: 63 CSCD: 0

Export
Share
Collection
Album

Development and Application of Vacuum Station and Chilling Exhaust Valve for Vacuum Die Casting
Vol. 36, Issue 5, Pages: 492-493(2016)
Published： 2016 ，
DOI： 10.15980/j.tzzz.2016.05.014

扫描看全文

[1]徐飞跃,陈剑虹,万里,安肇勇,齐劲风,伍伟志,曾庆杰.基于真空站和激冷排气阀的真空压铸技术开发与应用[J].特种铸造及有色合金,2016,36(05):492-493.

Xu Feiyue, Chen Jianhong, Wan Li, et al. Development and Application of Vacuum Station and Chilling Exhaust Valve for Vacuum Die Casting. [J]. Special Casting & Nonferrous Alloys 36(5):492-493(2016)
[1]徐飞跃,陈剑虹,万里,安肇勇,齐劲风,伍伟志,曾庆杰.基于真空站和激冷排气阀的真空压铸技术开发与应用[J].特种铸造及有色合金,2016,36(05):492-493. DOI： 10.15980/j.tzzz.2016.05.014.

Xu Feiyue, Chen Jianhong, Wan Li, et al. Development and Application of Vacuum Station and Chilling Exhaust Valve for Vacuum Die Casting. [J]. Special Casting & Nonferrous Alloys 36(5):492-493(2016) DOI： 10.15980/j.tzzz.2016.05.014.

摘要

自主开发了将真空站和激冷排气阀结合的真空压铸技术。结果表明

采用集中提供真空的真空站模式的压铸机边真空控制系统

可以减少每台压铸机机边占地面积1.35m

同时提高了真空系统的稳定性和可靠性

降低了操作难度。采用激冷排气阀

在保证真空效果的基础上

大大降低了真空阀维修和保养的工作量

降低了劳动强度。

Abstract

Vacuum die casting technology was developed based on the vacuum station and chill venting valve.The results demonstrate that area of vacuum die casting machine control system is reduced up to1.35m2.Then stability and reliability of vacuum station system are improved

greatly decreasing the operation technological requirement of the worker.Through setting chilling venting valve

the maintenance of vacuum valve was reduced

and labour intensity was relieved.