Effect of Texture and Grain Size on Mechanical Properties of AZ61 Magnesium Alloy during Close-Die Hot-Pressing of Extruded Performs

Cao Fenghong; Chen Yungui; Long Siyuan

doi:10.15980/j.tzzz.2016.03.005

Views : 0 下载量: 167 CSCD: 1

Export
Share
Collection
Album

Effect of Texture and Grain Size on Mechanical Properties of AZ61 Magnesium Alloy during Close-Die Hot-Pressing of Extruded Performs
Vol. 36, Issue 3, Pages: 242-245(2016)
Published： 2016 ，
DOI： 10.15980/j.tzzz.2016.03.005

扫描看全文

[1]曹凤红,陈云贵,龙思远.织构与晶粒对挤锻复合成形AZ61镁合金力学性能的影响[J].特种铸造及有色合金,2016,36(03):242-245.

Cao Fenghong, Chen Yungui, Long Siyuan. Effect of Texture and Grain Size on Mechanical Properties of AZ61 Magnesium Alloy during Close-Die Hot-Pressing of Extruded Performs. [J]. Special Casting & Nonferrous Alloys 36(3):242-245(2016)
[1]曹凤红,陈云贵,龙思远.织构与晶粒对挤锻复合成形AZ61镁合金力学性能的影响[J].特种铸造及有色合金,2016,36(03):242-245. DOI： 10.15980/j.tzzz.2016.03.005.

Cao Fenghong, Chen Yungui, Long Siyuan. Effect of Texture and Grain Size on Mechanical Properties of AZ61 Magnesium Alloy during Close-Die Hot-Pressing of Extruded Performs. [J]. Special Casting & Nonferrous Alloys 36(3):242-245(2016) DOI： 10.15980/j.tzzz.2016.03.005.

摘要

采用AZ61镁合金挤压态预成形坯材

通过不同变形程度的模锻成形试验制备AZ61镁合金拉伸试样

运用金相观察、电子背散射衍射（EBSD）取向成像技术

分析了AZ61镁合金在挤锻复合成形过程中晶粒尺寸与织构对其室温力学性能的影响。结果表明

挤压态预成形试样存在强烈的基面织构

晶粒处于硬取向

基面滑移难以启动

AZ61镁合金具有较高的屈服强度。在基面织构强度相似的情况下

晶粒细化可提高试样的屈服强度和伸长率

但不能通过变形的无限增加改善合金的组织与性能。

Abstract

Using AZ61 extruded performs

tensile specimens of AZ61 magnesium alloy were fabricated by close-die hot pressing with varied deformation rate.Effects of grain size and texture during close-die hotpressing process on ambient mechanical properties of the alloy specimens were analyzed by OM

EBSD.The results reveal that intense basic texture can be observed in the extruded performs

and the grain is located at hard orientation

so it is difficult to slide up

taking the high yield strength.Under the condition of the similar primary texture intensity

grain refinement can improve the yield strength and elongation of the alloy specimens

however

deformation rate is limited for improving the microstructure and properties of the alloy specimens.

关键词

AZ61镁合金挤锻复合成形织构晶粒尺寸力学性能

Keywords

AZ61Magnesium AlloyNet-shape PerformTextureGrain SizeMechanical Properties

references

Alert me when the article has been cited

提交

Influence of Stabilizing Annealing on Properties and Texture Evolution of 5B01 Alloy

Influence of Annealing Heat Treatment on Microstructure and Properties of AZ31B Magnesium Alloy Sheet

Texture and Mechanical Properties of AZ31 Magnesium Alloy by Asynchronous Rolling

Composite Refining Process of Al-7Si-Mg Alloy

Effects of Different Rolling Rouths on Microstructure,Mechanical Properties and Corrosion Resistance of AZ31 Alloys Sheets