Hot Continuous Rolling Slab of TA10Titanium Alloy by Electron Beam Cold Hearth Single Melting

Huang Haiguang; Cao Zhanyuan; Li Zhimin; Shi Yaming; Zhang Yuqin; Bao Guihua

doi:10.15980/j.tzzz.2016.01.025

Views : 0 下载量: 145 CSCD: 3

Export
Share
Collection
Album

Hot Continuous Rolling Slab of TA10Titanium Alloy by Electron Beam Cold Hearth Single Melting
Vol. 36, Issue 1, Pages: 90-93(2016)
Published： 2016 ，
DOI： 10.15980/j.tzzz.2016.01.025

扫描看全文

[1]黄海广,曹占元,李志敏,史亚鸣,张玉勤,保贵华.电子束冷床炉单次熔炼TA10合金热连轧板坯[J].特种铸造及有色合金,2016,36(01):90-93.

Huang Haiguang, Cao Zhanyuan, Li Zhimin, et al. Hot Continuous Rolling Slab of TA10Titanium Alloy by Electron Beam Cold Hearth Single Melting. [J]. Special Casting & Nonferrous Alloys 36(1):90-93(2016)
[1]黄海广,曹占元,李志敏,史亚鸣,张玉勤,保贵华.电子束冷床炉单次熔炼TA10合金热连轧板坯[J].特种铸造及有色合金,2016,36(01):90-93. DOI： 10.15980/j.tzzz.2016.01.025.

Huang Haiguang, Cao Zhanyuan, Li Zhimin, et al. Hot Continuous Rolling Slab of TA10Titanium Alloy by Electron Beam Cold Hearth Single Melting. [J]. Special Casting & Nonferrous Alloys 36(1):90-93(2016) DOI： 10.15980/j.tzzz.2016.01.025.

摘要

针对目前VAR法制备TA10合金铸锭后续加工卷板存在的不足

初步分析电子束冷床炉熔炼过程中的组元挥发机理

研究TA10合金在电子束冷床炉上的单次熔炼工艺。结果表明

经电子束冷床炉单次熔炼的TA10合金热连轧板坯化学成分均匀

铸锭宏观组织均匀

满足卷板的后续加工要求。

Abstract

Aiming at existing deficiency of TA10 alloy ingot in the subsequent processing coil preparation in VAR

the volatilization mechanism of element in electron beam cold hearth melting was expounded.Single electron beam cold hearth melting technology of TA10 alloy was analyzed.The results show that the chemical compositions exhibit uniform in the TA10 alloy ingot by electron beam cold hearth melting with the homogeneous macrostructure

meeting the standards through the coil subsequent processing.

关键词

电子束冷床炉熔炼单次熔炼TA10合金热连轧

Keywords

Electron Beam Cold Hearth MetlingSingle MeltingTA10AlloyHot Rolling

references

Alert me when the article has been cited

提交

Slab Ingot of Ti-2Al-1.5Mn Titanium Alloy Prepared by Plasma Arc Cold Hearth Single Melting