Effects of Speed Ability of Liquid Surface Pressure System on Low Pressure Castings Quality

Li Changhai; Zhu Lin; Yu Ning; Dong Xiuqi

doi:10.15980/j.tzzz.2015.10.016

Views : 0 下载量: 67 CSCD: 1

Export
Share
Collection
Album

Effects of Speed Ability of Liquid Surface Pressure System on Low Pressure Castings Quality
Vol. 35, Issue 10, Pages: 1061-1064(2015)
Published： 2015 ，
DOI： 10.15980/j.tzzz.2015.10.016

扫描看全文

[1]李昌海,朱霖,于宁,董秀琦.液面加压控制系统的快速性对铸件品质的影响[J].特种铸造及有色合金,2015,35(10):1061-1064.

Li Changhai, Zhu Lin, Yu Ning, et al. Effects of Speed Ability of Liquid Surface Pressure System on Low Pressure Castings Quality. [J]. Special Casting & Nonferrous Alloys 35(10):1061-1064(2015)
[1]李昌海,朱霖,于宁,董秀琦.液面加压控制系统的快速性对铸件品质的影响[J].特种铸造及有色合金,2015,35(10):1061-1064. DOI： 10.15980/j.tzzz.2015.10.016.

Li Changhai, Zhu Lin, Yu Ning, et al. Effects of Speed Ability of Liquid Surface Pressure System on Low Pressure Castings Quality. [J]. Special Casting & Nonferrous Alloys 35(10):1061-1064(2015) DOI： 10.15980/j.tzzz.2015.10.016.

摘要

根据流体力学原理

揭示出液面加压控制系统快速性越好

在填充水平面时

其速度高于液面上升的垂直速度的倍数就越大（可达100倍）

因而在该处产生液、气两相流并向垂直部分推进

造成最后填充部位出现铸造缺陷

故快速性差的比例调节器比快速性好的组合阀更适用于作低压铸造的液面加压控制系统。

Abstract

Based on the fluid mechanics principle

it is shown that if the speed ability of liquid surface pressure system is the better

the horizontal velocity will be higher（it can be up to hundreds times.）than the vertical velocity

when the molten metal fills the horizontal plane.So liquid-gas two-phase flow will appear in the horizontal plane

and it will move towards the vertical area

leading to the generation of cast defects at those areas finally filled.Therefore

the proportional controller with a slower speed ability than the combinational valves is more suitable for the low pressure die casting of liquid surface pressure system.

关键词

低压铸造液面加压控制系统快速性

Keywords

Low Pressures Die CastingLiquid Surface Pressure SystemSpeed Ability

references

Alert me when the article has been cited

提交

暂无数据