Design of Die Casting Mould for Transmission Extension Box

Views : 0 下载量: 114 CSCD: 1

Export
Share
Collection
Album

Design of Die Casting Mould for Transmission Extension Box
Vol. 35, Issue 8, Pages: 851-853(2015)
Published： 2015 ，
DOI： 10.15980/j.tzzz.2015.08.019

扫描看全文

[1]谭伟,程芳.变速器延伸箱压铸模具设计[J].特种铸造及有色合金,2015,35(08):851-853.

Tan Wei, Cheng Fang. Design of Die Casting Mould for Transmission Extension Box. [J]. Special Casting & Nonferrous Alloys 35(8):851-853(2015)
[1]谭伟,程芳.变速器延伸箱压铸模具设计[J].特种铸造及有色合金,2015,35(08):851-853. DOI： 10.15980/j.tzzz.2015.08.019.

Tan Wei, Cheng Fang. Design of Die Casting Mould for Transmission Extension Box. [J]. Special Casting & Nonferrous Alloys 35(8):851-853(2015) DOI： 10.15980/j.tzzz.2015.08.019.

摘要

根据变速器延伸箱压铸件结构特点

选择作为装配基准的底部平面为分型面

在对成形部分进行有效分割的基础上

设计了两套独立的抽芯结构

并给出了浇注系统及排溢系统布局图

生产合格铸件。

Abstract

According to the structural characteristics of transmission extension box

large assembly datum plane was selected as parting surface.On the basis of forming part of the segmentation

two sets of independent core-pulling structure were designed.And the detailed casting and overflow system layout were presented.

关键词

压铸模变速器抽芯机构浇注及排溢系统

Keywords

Die Casting MouldAuto TransmissionCore-Pulling MechanismCasting and Overflow System

references

Alert me when the article has been cited

提交

相关文章

Die Casting on Cable TV Alloter With CAD

Intelligent CAD System of Die Casting Mould for Elbow

Design of Lost Foam Mould for Non-machining Cross Valve

Design of Die Casting Die for AISil2Cu Pump Wheel

Over-constrained Locating and some Improving Measures in Die Casting Mould Design

相关作者

卢丁上海工程技术大学;上海精峰模具压铸厂;上海工程技术大学上海精峰模具压铸厂

Xu Jiping 上海工程技术大学;上海精峰模具压铸厂;上海工程技术大学上海精峰模具压铸厂

王瑞沈阳工业学院

王晓方沈阳工业学院

邓子玉沈阳工业学院

王承志沈阳工业学院

Meng Xianjia Wang Chengzhi Deng Ziyu Wang Xiaofang Wang Rui 沈阳工业学院

Xu Zhengzheng 安徽叉车集团公司合肥铸锻厂

相关机构

Shanghai University Of Engineering Science)Lu Ding

上海精峰模具压铸厂

上海工程技术大学上海精峰模具压铸厂

Shenyang Institute of Technology

Hefei Castings & Forging Plant

⁰