Effect of B and Cu Elements on Microstructure and Properties of the Aluminum Electrical Round Rod

Gong Xiangpeng; Zhang Xiaoyan; Gao Hongxuan; Huang Xin; Zhang Junjie

doi:10.15980/j.tzzz.2015.07.031

Views : 0 下载量: 75 CSCD: 1

Export
Share
Collection
Album

Effect of B and Cu Elements on Microstructure and Properties of the Aluminum Electrical Round Rod
Vol. 35, Issue 7, Pages: 774-776(2015)
Published： 2015 ，
DOI： 10.15980/j.tzzz.2015.07.031

扫描看全文

[1]巩向鹏,张晓燕,高红选,黄鑫,张俊杰.B和Cu对铝电工圆杆组织与性能的影响[J].特种铸造及有色合金,2015,35(07):774-776.

Gong Xiangpeng, Zhang Xiaoyan, Gao Hongxuan, et al. Effect of B and Cu Elements on Microstructure and Properties of the Aluminum Electrical Round Rod. [J]. Special Casting & Nonferrous Alloys 35(7):774-776(2015)
[1]巩向鹏,张晓燕,高红选,黄鑫,张俊杰.B和Cu对铝电工圆杆组织与性能的影响[J].特种铸造及有色合金,2015,35(07):774-776. DOI： 10.15980/j.tzzz.2015.07.031.

Gong Xiangpeng, Zhang Xiaoyan, Gao Hongxuan, et al. Effect of B and Cu Elements on Microstructure and Properties of the Aluminum Electrical Round Rod. [J]. Special Casting & Nonferrous Alloys 35(7):774-776(2015) DOI： 10.15980/j.tzzz.2015.07.031.

摘要

研究了B、Cu元素对铸态铝电工圆杆组织与性能的影响。结果表明

B能与铝电工圆杆中的Fe、Ti、V、Mn杂质元素反应

形成硼化物并析出

使力学性能及电导率均有一定程度提升。复合添加B、Cu元素

能够在电导率降低较少的前提下获得较好的力学性能。当B、Cu添加量分别为0.08%、0.40%时

铸态铝电工圆杆具有较好的综合性能

电导率为34.68MS/m

抗拉强度为95 MPa

屈服强度为78 MPa。

Abstract

Effects of B、Cu on microstructure and properties of the as-cast aluminum electrical round rod were investigated.The results reveal that B can react with the Fe、Ti、V、Mn impurity elements

and Fe、Ti、V、Mn elements are precipitated out by forming the boride

which can improve the mechanical properties and conductivity to some extent.High mechanical properties can be obtained by composite adding B and Cu

and the conductivity will not be weakened significantly.When the content of B、Cu is 0.08%、0.40%（mass fraction）

the as-cast aluminum electrical round rod exhibits satisfied comprehensive performance

where the conductivity

tensile strength

yield strength reach 34.68MS/m

95 MPa and 78 MPa

respectively.