Numerical Simulation of Continuous Casting Square Billet during Induction Heating Process

Guo Jianlong; Hu Kuntai; Qiu Shengtao; Ma Yingchun; Wang Xuebing; Zhao Junxue

doi:10.15980/j.tzzz.2015.02.024

Views : 0 下载量: 193 CSCD: 8

Export
Share
Collection
Album

Numerical Simulation of Continuous Casting Square Billet during Induction Heating Process
Vol. 35, Issue 2, Pages: 184-188(2015)
Published： 2015 ，
DOI： 10.15980/j.tzzz.2015.02.024

扫描看全文

[1]郭建龙,胡坤太,仇圣桃,麻迎春,王学兵,赵俊学.连铸方坯感应加热数值模拟分析[J].特种铸造及有色合金,2015,35(02):184-188.

Guo Jianlong, Hu Kuntai, Qiu Shengtao, et al. Numerical Simulation of Continuous Casting Square Billet during Induction Heating Process. [J]. Special Casting & Nonferrous Alloys 35(2):184-188(2015)
[1]郭建龙,胡坤太,仇圣桃,麻迎春,王学兵,赵俊学.连铸方坯感应加热数值模拟分析[J].特种铸造及有色合金,2015,35(02):184-188. DOI： 10.15980/j.tzzz.2015.02.024.

Guo Jianlong, Hu Kuntai, Qiu Shengtao, et al. Numerical Simulation of Continuous Casting Square Billet during Induction Heating Process. [J]. Special Casting & Nonferrous Alloys 35(2):184-188(2015) DOI： 10.15980/j.tzzz.2015.02.024.

摘要

运用ANSYS

建立了20MnSi连铸方坯电磁-热耦合分析的有限元模型

得到了涡流和温度场的分布图

并对结果进行了分析。在不同的电参数下对20MnSi连铸方坯加热过程的温度分布进行了模拟计算

获得了不同加热参数下连铸坯的温度场分布和涡流分布

分析了不同参数对加热效果的影响。结果表明

频率和电流值对温度场和涡流的分布都有较大的影响。最后

对模拟结果进行了验证

发现模拟结果与实测结果符合良好。

Abstract

The FEM model of electromagnetic-thermal coupled field was built up for 20 MnSi continuous casting square billet by using ANSYS software.The distribution of eddy current and temperature field was presented

and the simulated results were analyzed.The distribution of temperature and eddy current was visualized by simulation calculation under different induction heating parameters.In addition

influence of parameters on the induction heating was analyzed.The results show that parameters of current and frequency greatly affect the distribution of temperature and eddy current.Finally

simulation results were verified

and the simulated results were well agreement with the measured ones.