Design of Squeezing Casting Mould for Thin-walled-high Strength and Ductility Piston for Light-loading Power Machinery

Zhu Hu; Wang Qianting; Wang Huosheng; Dai Pinqiang; Zhang Dan

doi:10.15980/j.tzzz.2014.12.011

Views : 0 下载量: 107 CSCD: 0

Export
Share
Collection
Album

Design of Squeezing Casting Mould for Thin-walled-high Strength and Ductility Piston for Light-loading Power Machinery
Vol. 34, Issue 12, Pages: 1269-1272(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.12.011

扫描看全文

[1]朱虎,王乾廷,王火生,戴品强,张丹.薄壁高强韧轻载动力机械活塞挤压铸造模具设计[J].特种铸造及有色合金,2014,34(12):1269-1272.

Zhu Hu, Wang Qianting, Wang Huosheng, et al. Design of Squeezing Casting Mould for Thin-walled-high Strength and Ductility Piston for Light-loading Power Machinery. [J]. Special Casting & Nonferrous Alloys 34(12):1269-1272(2014)
[1]朱虎,王乾廷,王火生,戴品强,张丹.薄壁高强韧轻载动力机械活塞挤压铸造模具设计[J].特种铸造及有色合金,2014,34(12):1269-1272. DOI： 10.15980/j.tzzz.2014.12.011.

Zhu Hu, Wang Qianting, Wang Huosheng, et al. Design of Squeezing Casting Mould for Thin-walled-high Strength and Ductility Piston for Light-loading Power Machinery. [J]. Special Casting & Nonferrous Alloys 34(12):1269-1272(2014) DOI： 10.15980/j.tzzz.2014.12.011.

摘要

为了确定薄壁高强韧轻载动力机械活塞的最佳工艺及模具结构

采用Flow-3D对不同挤压铸造工艺方案的充型及凝固过程进行了模拟

确定了最佳的工艺方案。基于此方案的模流分析

优化了模具结构。经生产验证

设计方案合理

符合铸件使用要求。

Abstract

Filling and solidification of different squeezing casting schemes were simulated with the help of the Flow-3Dfor thin-walled high strength-ductility piston for light-loading power machinery to determine the optimized parameters and mould structure.Based on the Flow-3Danalysis

the mould structure was optimized.The practical production verified that the optimized design is feasible

meeting the piston requirements.