Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process

Liu Honglei; Liu Hongfei; Su Xingzhen; Zhang Bao

doi:10.15980/j.tzzz.2014.08.013

Views : 0 下载量: 238 CSCD: 0

Export
Share
Collection
Album

Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process
Vol. 34, Issue 8, Pages: 889-892(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.08.013

扫描看全文

[1]刘宏磊,刘宏峰,苏兴振,张宝.6061合金轮毂锻造过程中的力学性能变化[J].特种铸造及有色合金,2014,34(08):889-892.

Liu Honglei, Liu Hongfei, Su Xingzhen, et al. Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process. [J]. Special Casting & Nonferrous Alloys 34(8):889-892(2014)
[1]刘宏磊,刘宏峰,苏兴振,张宝.6061合金轮毂锻造过程中的力学性能变化[J].特种铸造及有色合金,2014,34(08):889-892. DOI： 10.15980/j.tzzz.2014.08.013.

Liu Honglei, Liu Hongfei, Su Xingzhen, et al. Change of Mechanical Properties of 6061 Aluminum Alloy Wheel during Forging Process. [J]. Special Casting & Nonferrous Alloys 34(8):889-892(2014) DOI： 10.15980/j.tzzz.2014.08.013.

摘要

针对6061变形铝合金锻造轮毂T6热处理后出现力学性能异常

研究了加工过程中不同阶段及不同T6热处理工艺对6061变形铝合金轮毂力学性能的影响

并对产生力学性能异常的原因进行了分析

通过调整热处理工艺找到了解决力学性能异常的途径。

Abstract

Abnormal mechanical properties of forged 6061 wrought aluminum alloy wheel could be analyzed after T6 heat treatment.Effects of different working stages and T6 treatment on mechanical properties of the wheel were analyzed.In addition

the origination of abnormal mechanical properties was described.The countermeasures of eliminating abnormal mechanical property data were presented through adjusting heat treatment processes.