Mechanical Properties of Metal Particles Filled the E-44 Epoxy Resin

Fan Hongxun; Liu Feng

doi:10.15980/j.tzzz.2014.08.005

Views : 0 下载量: 50 CSCD: 0

Export
Share
Collection
Album

Mechanical Properties of Metal Particles Filled the E-44 Epoxy Resin
Vol. 34, Issue 8, Pages: 798-800(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.08.005

扫描看全文

[1]范宏训,刘峰.金属颗粒填充E-44背衬材料的力学性能[J].特种铸造及有色合金,2014,34(08):798-800.

Fan Hongxun, Liu Feng. Mechanical Properties of Metal Particles Filled the E-44 Epoxy Resin. [J]. Special Casting & Nonferrous Alloys 34(8):798-800(2014)
[1]范宏训,刘峰.金属颗粒填充E-44背衬材料的力学性能[J].特种铸造及有色合金,2014,34(08):798-800. DOI： 10.15980/j.tzzz.2014.08.005.

Fan Hongxun, Liu Feng. Mechanical Properties of Metal Particles Filled the E-44 Epoxy Resin. [J]. Special Casting & Nonferrous Alloys 34(8):798-800(2014) DOI： 10.15980/j.tzzz.2014.08.005.

摘要

研究了填料（铁粉和铝粉）含量对E-44环氧树脂背衬材料力学性能的影响。结果表明

铁粉与E-44的质量比为（3

.2）∶1

铝粉与E-44的质量比为（2

.2）∶1时

能获得均匀的背衬材料

其抗压强度为80MPa左右

抗拉强度为27

0MPa

能够满足普通注射模的强度要求;随着填料与E-44的质量比的增加

强度呈下降的趋势。

Abstract

Effects of filler content（iron powder and aluminum powder）on the mechanical properties of the E-44 epoxy resin were investigated.The results indicate that the compression strength and the tensile strength of the resin materials reach 80 MPa and 27

0MPa

respectively

with iron powder to E-44 resin of（3

.2）∶1and aluminum powder to E-44of（2

.2）∶1

meeting the strength requirement of common ejection mold.The strength of filler material is decreased with the mass ratio of filler content and E-44 epoxy resin increase.

关键词

铁粉铝粉填料背衬材料

Keywords

Iron PowderAluminum PowderFillerResin Material

references

Alert me when the article has been cited

提交

暂无数据