Determination of Push Rod Position for Die Casting Aluminum Alloy Parts

Huang Hanyun; Pan HuaShu; Wang Hua; Yuan Yong

doi:10.15980/j.tzzz.2014.06.014

Views : 0 下载量: 43 CSCD: 1

Export
Share
Collection
Album

Determination of Push Rod Position for Die Casting Aluminum Alloy Parts
Vol. 34, Issue 6, Pages: 605-606(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.06.014

扫描看全文

[1]黄汉云,潘华书,王华,袁勇.铝合金压铸件推杆位置的设置[J].特种铸造及有色合金,2014,34(06):605-606.

Huang Hanyun, Pan HuaShu, Wang Hua, et al. Determination of Push Rod Position for Die Casting Aluminum Alloy Parts. [J]. Special Casting & Nonferrous Alloys 34(6):605-606(2014)
[1]黄汉云,潘华书,王华,袁勇.铝合金压铸件推杆位置的设置[J].特种铸造及有色合金,2014,34(06):605-606. DOI： 10.15980/j.tzzz.2014.06.014.

Huang Hanyun, Pan HuaShu, Wang Hua, et al. Determination of Push Rod Position for Die Casting Aluminum Alloy Parts. [J]. Special Casting & Nonferrous Alloys 34(6):605-606(2014) DOI： 10.15980/j.tzzz.2014.06.014.

摘要

根据零件具体结构的特征

确定了压铸铝合金推杆的合理位置和推杆的适当数量。生产实践表明

铸件各部位受力均衡

能顺利地被推杆推出

不会发生变形

保证了铸件质量。

Abstract

According to the characteristics of the specific structure of the aluminum alloy parts

the correct position and numbers of the pusher were determined.Practical production reveals that all positions of the die casting parts are subjected to the homogeneous pushing force to be pushed out smoothly

and the deformation is avoided and casting quality is ensured.