Optimized Design of Metal Delivery System for Magnesium Alloy Sheet with Vertical Twin-Roll Casting Process

Yu Qun; Hu Xiaodong; Wang Zhenmin; Zhao Hongyang; Huang Longhuan; Sun Xinglong; Chen Yu

doi:10.15980/j.tzzz.2014.04.018

Views : 0 下载量: 134 CSCD: 1

Export
Share
Collection
Album

Optimized Design of Metal Delivery System for Magnesium Alloy Sheet with Vertical Twin-Roll Casting Process
Vol. 34, Issue 4, Pages: 381-384(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.04.018

扫描看全文

[1]于群,胡小东,王振敏,赵红阳,黄龙欢,孙兴龙,陈宇.立式镁合金双辊铸轧布流系统的优化设计[J].特种铸造及有色合金,2014,34(04):381-384.

Yu Qun, Hu Xiaodong, Wang Zhenmin, et al. Optimized Design of Metal Delivery System for Magnesium Alloy Sheet with Vertical Twin-Roll Casting Process. [J]. Special Casting & Nonferrous Alloys 34(4):381-384(2014)
[1]于群,胡小东,王振敏,赵红阳,黄龙欢,孙兴龙,陈宇.立式镁合金双辊铸轧布流系统的优化设计[J].特种铸造及有色合金,2014,34(04):381-384. DOI： 10.15980/j.tzzz.2014.04.018.

Yu Qun, Hu Xiaodong, Wang Zhenmin, et al. Optimized Design of Metal Delivery System for Magnesium Alloy Sheet with Vertical Twin-Roll Casting Process. [J]. Special Casting & Nonferrous Alloys 34(4):381-384(2014) DOI： 10.15980/j.tzzz.2014.04.018.

摘要

根据立式双辊铸轧机设备实际条件

设计出一套镁合金铸轧布流系统

利用Anycasting?软件对布流系统内的流动状态和温度分布进行了数值模拟;同时根据相似理论制作出一套与实际系统比例为1∶1的有机玻璃模型

用以进行物理模拟。结果表明

多级以及中间带有挡坝的布流系统不但可降低流股对熔池液面的冲击

还可以获得均匀的流场

挡坝的最优化高度为10mm

并优化了挡坝位置

确定了布流系统出口处的宽度。当宽度为1mm时可获得稳定且温度分布均匀的熔池。

Abstract

Based on the working condition of the vertical twin-roll casting machine

the metal delivery system for magnesium alloy sheet with twin-roll casting process was designed

and flow field and temperature distribution in the system were simulated by the Anycasting software.Meanwhile

according to similar principles

an acrylic experimental model on the ratio of 1∶1was manufactured to conduct physical simulation.The results show that the system with multi-level and dams can not only reduce the impact of liquid magnesium alloy to molten bath but also obtain the uniform distribution along the rollers. The optimization height of dam is 10mm.In addition

the position of the dams was optimized.When the width of the system′s outlet is 1mm

the uniform temperature distribution in molten pool can be observed.