Effect of Casting Speed on Horizontally Continuously Cast Co-Cr-W Wire

Yao Jianzhong; Duan Wangchun; Liu Junzhao; Zhang Zibin; Zhang Yaxiang

doi:10.15980/j.tzzz.2014.02.040

Views : 0 下载量: 71 CSCD: 0

Export
Share
Collection
Album

Effect of Casting Speed on Horizontally Continuously Cast Co-Cr-W Wire
Vol. 34, Issue 2, Pages: 146-149(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.02.040

扫描看全文

[1]姚建忠,段望春,刘俊钊,张自斌,张亚祥.铸造速度对Co-Cr-W丝材连铸过程的影响[J].特种铸造及有色合金,2014,34(02):146-149.

Yao Jianzhong, Duan Wangchun, Liu Junzhao, et al. Effect of Casting Speed on Horizontally Continuously Cast Co-Cr-W Wire. [J]. Special Casting & Nonferrous Alloys 34(2):146-149(2014)
[1]姚建忠,段望春,刘俊钊,张自斌,张亚祥.铸造速度对Co-Cr-W丝材连铸过程的影响[J].特种铸造及有色合金,2014,34(02):146-149. DOI： 10.15980/j.tzzz.2014.02.040.

Yao Jianzhong, Duan Wangchun, Liu Junzhao, et al. Effect of Casting Speed on Horizontally Continuously Cast Co-Cr-W Wire. [J]. Special Casting & Nonferrous Alloys 34(2):146-149(2014) DOI： 10.15980/j.tzzz.2014.02.040.

摘要

采用SolidWorks软件建模与Fluent流体模拟软件相结合

模拟了不同铸造速度下水平连铸硬脆合金Co-Cr-W丝材在结晶器内的温度分布、速度分布状况

并分析了铸造速度对凝固壁厚度和内部质元速度的影响。试制了合金圆坯丝材

并对模拟结果进行了验证分析。结果表明

当铸造速度为1.5m/min时

合金液既能形成有效的壁厚

又不存在蓄能现象

较为适宜。模拟分析结果与实际结果相符合。

Abstract

Based on SolidWorks software combining with the Fluent software

the temperature and velocity distribution in process of horizontally continuously casting brittle Co-Cr-W alloy wire were simulated with different casting speeds

and effects of casting speed on wall-thickness of solidified shell and internal solute diffusion were analyzed.Meanwhile

Co-Cr-W wire was trial-produced to verify the simulated feasibility.The results show that with casting speed of 1.5m/min

the effective thickness of solidification shell can be formed and the energy can be consumed completely.The simulation results are well in agreement with practical ones.