Process Optimization of Sand Casting Bronze Bell Based on the ProCAST Software

Views : 0 下载量: 187 CSCD: 5

Export
Share
Collection
Album

Process Optimization of Sand Casting Bronze Bell Based on the ProCAST Software
Vol. 34, Issue 2, Pages: 187-190(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.02.029

扫描看全文

[1]孙彪,夏元吉.基于ProCAST砂型铸造铜钟的工艺优化[J].特种铸造及有色合金,2014,34(02):187-190.

Sun Biao, Xia Yuanji. Process Optimization of Sand Casting Bronze Bell Based on the ProCAST Software. [J]. Special Casting & Nonferrous Alloys 34(2):187-190(2014)
[1]孙彪,夏元吉.基于ProCAST砂型铸造铜钟的工艺优化[J].特种铸造及有色合金,2014,34(02):187-190. DOI： 10.15980/j.tzzz.2014.02.029.

Sun Biao, Xia Yuanji. Process Optimization of Sand Casting Bronze Bell Based on the ProCAST Software. [J]. Special Casting & Nonferrous Alloys 34(2):187-190(2014) DOI： 10.15980/j.tzzz.2014.02.029.

摘要

采用ProCAST软件

对砂型铸造中铜钟的充型和凝固过程进行数值模拟

预测其缺陷产生的部位

并分析其产生的原因。在此基础上

通过改进浇注系统的设计

有效地减少了缩孔、缩松在重要部位的产生

从而优化了工艺

提高了产品的品质。

Abstract

The filling and solidification process of bronze bell in sand casting was simulated based on the ProCAST software

and casting defects were predicted.The origination was analyzed.Based on the above simulation

through improving the design of gating system

the defects in the important part of bronze bell were effectively reduced to realize the optimization of the process

and the quality of the product was improved too.

关键词

ProCAST数值模拟铜钟优化工艺

Keywords

ProCASTNumerical SimulationBronze BellProcess Optimization

references

Alert me when the article has been cited

提交

相关文章

Effects of Processing Parameters on Thixo-die Casting Box-type Parts for Automobile

Analysis of Sand Mold Gravity Casting Process for Aluminum Alloy Piston Based on ProCAST Software

Processing Optimization of Cast Copper Stave Based on ProCAST Software

Processing Optimization of Investment Castings for Industrial Robot Based on the ProCAST Software

Numerical Simulation of Die Casting Al Alloy Cylinder Based on the ProCAST Software

相关作者

Vanluu Dao~1 西安交通大学机械工程学院; 黎贵敦理工大学

Zhao Shengdun~1 西安交通大学机械工程学院

Lin Wenjie~1 西安交通大学机械工程学院

Wu Jun 衢州学院机械工程学院

Zhou Zhaozhong 衢州学院机械工程学院

Zhang Yuanxiang 衢州学院机械工程学院

Lu Xianzhong 武汉钢铁重工集团有限公司

Wan Xuwei 武汉钢铁重工集团有限公司

相关机构

School of Mechanical Engineering,Xi’an Jiaotong University

Le Quy Don Technical University

Department of Mechanical Engineering,Quzhou College

Heavy Industry Group Co.,Ltd of WISCO

Research and Development Center of Wuhan Iron &Steel(Group)Corporation

⁰