Hot Deformation Behavior and Processing Map of AZ61 Magnesium Alloy

Zhang Rong; Qian Shukun

doi:10.15980/j.tzzz.2014.01.031

Views : 0 下载量: 244 CSCD: 6

Export
Share
Collection
Album

Hot Deformation Behavior and Processing Map of AZ61 Magnesium Alloy
Vol. 34, Issue 1, Pages: 19-22(2014)
Published： 2014 ，
DOI： 10.15980/j.tzzz.2014.01.031

扫描看全文

[1]张蓉,钱书琨.AZ61镁合金高温变形行为及热加工图[J].特种铸造及有色合金,2014,34(01):19-22.

Zhang Rong, Qian Shukun. Hot Deformation Behavior and Processing Map of AZ61 Magnesium Alloy. [J]. Special Casting & Nonferrous Alloys 34(1):19-22(2014)
[1]张蓉,钱书琨.AZ61镁合金高温变形行为及热加工图[J].特种铸造及有色合金,2014,34(01):19-22. DOI： 10.15980/j.tzzz.2014.01.031.

Zhang Rong, Qian Shukun. Hot Deformation Behavior and Processing Map of AZ61 Magnesium Alloy. [J]. Special Casting & Nonferrous Alloys 34(1):19-22(2014) DOI： 10.15980/j.tzzz.2014.01.031.

摘要

采用Gleeble-1500热模拟试验机对AZ61镁合金在变形温度为250

00℃、应变速率为0.001

0.000s-1条件下进行热压缩试验

研究了合金的热压缩变形行为及热加工图。结果表明

合金在高应变速率（10.000s-1）变形条件下具有较高的能量耗散率;该工艺范围内动态再结晶同时在初始晶界和孪晶上发生

合金具有较高的再结晶程度。因此

变形温度为250

00℃、应变速率为10.000s-1是较好的热加工工艺。

Abstract

Hot compression of AZ61 magnesium alloy was conducted on the Gleeble-1500hot-simulator at 250

00℃ and 0.001

0s-1

and the deformation behavior and processing map of the AZ61 alloy were investigated.The results show that ZA61 alloy deformed at strain rate of 10s-1 exhibits higher power dissipation

and dynamic recrystallizaton（DRX）occurs extensively both at the grain boundaries and twins

consequently resulting in a more homogeneous DRX grains.Therefore

the optimized processing parameters of AZ61 alloy are the temperature range of 250

00℃ and strain rate of 10s-1.