Production of Bimetallic Curvature Pipes by LFC（Lost Foam Casting）

Guo Yajun; Ye Shengping; Kong Dexuan; Xiao Xiaofeng

doi:10.15980/j.tzzz.2013.11.005

Views : 0 下载量: 122 CSCD: 1

Export
Share
Collection
Album

Production of Bimetallic Curvature Pipes by LFC（Lost Foam Casting）
Vol. 33, Issue 11, Pages: 1034-1036(2013)
Published： 2013 ，
DOI： 10.15980/j.tzzz.2013.11.005

扫描看全文

[1]郭亚军,叶升平,孔德选,肖小峰.双金属复合弯管的消失模铸造[J].特种铸造及有色合金,2013,33(11):1034-1036.

Guo Yajun, Ye Shengping, Kong Dexuan, et al. Production of Bimetallic Curvature Pipes by LFC（Lost Foam Casting）. [J]. Special Casting & Nonferrous Alloys 33(11):1034-1036(2013)
[1]郭亚军,叶升平,孔德选,肖小峰.双金属复合弯管的消失模铸造[J].特种铸造及有色合金,2013,33(11):1034-1036. DOI： 10.15980/j.tzzz.2013.11.005.

Guo Yajun, Ye Shengping, Kong Dexuan, et al. Production of Bimetallic Curvature Pipes by LFC（Lost Foam Casting）. [J]. Special Casting & Nonferrous Alloys 33(11):1034-1036(2013) DOI： 10.15980/j.tzzz.2013.11.005.

摘要

采用消失模铸造技术结合双金属液固复合铸造工艺制备了双金属复合弯管。对不同真空度条件下的复合弯管结合界面进行了观察

并对结合良好的双金属界面进行了显微组织观察、并做了硬度和冲击韧度等测试。结果表明

无真空条件下双金属界面结合良好

耐磨层硬度略有增加

复合层冲击韧度明显提升

αk可达24J·cm-2。

Abstract

Bimetallic curvature pipes were produced by liquid-solid casting technology combining with lost foam casting.Effects of different vacuum rate on the bonding interface of bimetallic curvature pipes were observed.Meanwhile

microstructure

hardness and impact toughness of bimetallic pipes with desirable bonding were investigated.The results indicate that bimetallic pipes present good bonding interfaces with the absence of vacuum pressure.The hardness of the high chromium cast iron is increased slightly

and the impact toughness is improved apparently

reaching 26J·cm-2.