Defects Analysis and Countermeasures of Large Area and Thin-Walled Aluminum Alloy Die Castings

Views : 0 下载量: 138 CSCD: 3

Defects Analysis and Countermeasures of Large Area and Thin-Walled Aluminum Alloy Die Castings
Vol. 33, Issue 8, Pages: 746-748(2013)
Published： 2013 ，
DOI： 10.15980/j.tzzz.2013.08.023

扫描看全文

[1]李建伟.大面积薄壁铝合金压铸件的缺陷分析与对策[J].特种铸造及有色合金,2013,33(08):746-748.

Li Jianwei. Defects Analysis and Countermeasures of Large Area and Thin-Walled Aluminum Alloy Die Castings. [J]. Special Casting & Nonferrous Alloys 33(8):746-748(2013)
[1]李建伟.大面积薄壁铝合金压铸件的缺陷分析与对策[J].特种铸造及有色合金,2013,33(08):746-748. DOI： 10.15980/j.tzzz.2013.08.023.

Li Jianwei. Defects Analysis and Countermeasures of Large Area and Thin-Walled Aluminum Alloy Die Castings. [J]. Special Casting & Nonferrous Alloys 33(8):746-748(2013) DOI： 10.15980/j.tzzz.2013.08.023.

在大面积薄壁铝合金件压铸过程中

由于铸件大面积薄壁的特点

工艺参数的较小变化和模具结构的不合理

使产品产生诸如成形不良、翘曲变形、冷隔和裂纹等压铸缺陷。以一个典型的大面积薄壁压铸件为例

通过对工艺参数和模具结构的分析

探讨了压铸件缺陷产生的原因

并提出了相应的对策。

During die casting large area and thin-walled aluminum alloy

some defects

such as cob webbing

warpage

cold shut and crack

occur in the die castings as a result of large area and thin wall

small change of parameters as well as unreasonable mold structure.Takes a large area and thin wall die casting as a typical example

through analyzing die casting parameters and mold structure

defects reason was described

and corresponding countermeasures were presented.

薄壁压铸件缺陷分析对策

Thin-walledDie CastingDefect AnalysisCountermeasures

Alert me when the article has been cited

提交