Internally Straight Finned Copper Tubes Produced by Heated Mold Continuous Casting Process

Li Woguang; Yu Yeqiu; Cai Lianshu

doi:10.15980/j.tzzz.2012.12.026

Views : 0 下载量: 82 CSCD: 1

Export
Share
Collection
Album

Internally Straight Finned Copper Tubes Produced by Heated Mold Continuous Casting Process
Vol. 32, Issue 12, Pages: 1145-1147(2012)
Published： 2012 ，
DOI： 10.15980/j.tzzz.2012.12.026

扫描看全文

[1]黎沃光,余业球,蔡莲淑.小直径内直翅铜管的热型连铸[J].特种铸造及有色合金,2012,32(12):1145-1147.

Li Woguang, Yu Yeqiu, Cai Lianshu. Internally Straight Finned Copper Tubes Produced by Heated Mold Continuous Casting Process. [J]. Special Casting & Nonferrous Alloys 32(12):1145-1147(2012)
[1]黎沃光,余业球,蔡莲淑.小直径内直翅铜管的热型连铸[J].特种铸造及有色合金,2012,32(12):1145-1147. DOI： 10.15980/j.tzzz.2012.12.026.

Li Woguang, Yu Yeqiu, Cai Lianshu. Internally Straight Finned Copper Tubes Produced by Heated Mold Continuous Casting Process. [J]. Special Casting & Nonferrous Alloys 32(12):1145-1147(2012) DOI： 10.15980/j.tzzz.2012.12.026.

摘要

用水平热型连铸法制备了外径为10mm的内直翅铜管。结果表明

通过控制凝固界面在铸型内的位置

减小铸管与铸型壁的摩擦力

热型连铸法可以制备具有复杂截面形状的内直翅铜管。热型连铸法可以实现真正意义上的连续铸造

从而消除铸件表面的周期性疤痕

得到光滑的表面

实现近净形铸造。并对内直翅铜管的形成原理和连铸过程中产生的热裂和冷隔缺陷的成因进行了分析讨论。

Abstract

Internally finned copper tubes with 10mm in outer diameters were produced by horizontal heated mold continuous casting.The results show that internally finned tubes with complex profile can be produced by horizontal heated mold continuous casting process through controlling solidification interface location in mould wall to reduce the friction force between tubes and mould wall

realizing the practical continuous casting.Meanwhile

periodic scar on tube surface can be eliminated

obtaining smooth surface and realizing near net-shape forming.Forming principle of the tubes and origination of hot crack and cold shut in the tubes during heated mold continuous casting were approached.