Design of Split Type Gating System in Investment Casting

Ji Zhijun

doi:10.15980/j.tzzz.2012.10.018

Views : 0 下载量: 95 CSCD: 1

Export
Share
Collection
Album

Design of Split Type Gating System in Investment Casting
Vol. 32, Issue 10, Pages: 924-925(2012)
Published： 2012 ，
DOI： 10.15980/j.tzzz.2012.10.018

扫描看全文

[1]纪志军.精密铸造分体式浇注系统的设计[J].特种铸造及有色合金,2012,32(10):924-925.

Ji Zhijun. Design of Split Type Gating System in Investment Casting. [J]. Special Casting & Nonferrous Alloys 32(10):924-925(2012)
[1]纪志军.精密铸造分体式浇注系统的设计[J].特种铸造及有色合金,2012,32(10):924-925. DOI： 10.15980/j.tzzz.2012.10.018.

Ji Zhijun. Design of Split Type Gating System in Investment Casting. [J]. Special Casting & Nonferrous Alloys 32(10):924-925(2012) DOI： 10.15980/j.tzzz.2012.10.018.

摘要

法兰三通整体结构由法兰盘和薄壁管组成

铸件存在严重的壁厚不均

浇注时几乎都产生严重的变形。通过采用分体式浇注系统

这一问题基本得到解决。

Abstract

The whole structure of the flange tee is composed of flange and thin-walled tube

so severe unevern wall-thickness can be observed at the castings.Severe deformation appears in the castings during pouring process.Through designing split type gating system

the deformation defects are eliminated effectively.