Influence of Electromagnetic Brake on Flow Field inWide Slab Continuous Casting Mould under High Casting Speed

Peng Qinyong1; Ji Hui2

doi:10.15980/j.tzzz.2012.04.039

Views : 0 下载量: 94 CSCD: 1

Export
Share
Collection
Album

Influence of Electromagnetic Brake on Flow Field inWide Slab Continuous Casting Mould under High Casting Speed
Vol. 32, Issue 4, Pages: 314-317(2012)
Published： 2012 ，
DOI： 10.15980/j.tzzz.2012.04.039

扫描看全文

[1]彭庆勇,冀慧.电磁制动对宽板坯高拉速结晶器内流场的影响[J].特种铸造及有色合金,2012,32(04):314-317.

Peng Qinyong1, Ji Hui2. Influence of Electromagnetic Brake on Flow Field inWide Slab Continuous Casting Mould under High Casting Speed. [J]. Special Casting & Nonferrous Alloys 32(4):314-317(2012)
[1]彭庆勇,冀慧.电磁制动对宽板坯高拉速结晶器内流场的影响[J].特种铸造及有色合金,2012,32(04):314-317. DOI： 10.15980/j.tzzz.2012.04.039.

Peng Qinyong1, Ji Hui2. Influence of Electromagnetic Brake on Flow Field inWide Slab Continuous Casting Mould under High Casting Speed. [J]. Special Casting & Nonferrous Alloys 32(4):314-317(2012) DOI： 10.15980/j.tzzz.2012.04.039.

摘要

以Fluent6.3为计算平台

采用数值模拟方法研究了电磁制动不同参数下宽板坯高拉速结晶器内的流场。结果表明

电磁制动可有效控制结晶器内钢液的流动

改变钢液的流动方向

改善钢液上下环流区的分配率。在静磁场作用下

上部环流区的流动增强

下部环流区流动减弱

自由液面的波动减轻。

Abstract

The liquid steel flow field in a wide slab continuous casting mould under different electromagnetic parameters was simulated by the Fluent 6.3 software.The results indicate that the electromagnetic brake can not only control the flow of liquid steel in the mould

but also change the flow direction

and then to improve the redistribution of the liquid steel flux in the slab continuous mold.The flow in the upper eddy is strengthened

and the flow in the lower eddy is weakened

so the fluctuation of meniscus is improved in role of static magnetic field.