Electromagnetic Separation of Oxide Inclusions from Copper Alloy

Li Pengchao; Zuo Shibin; Tang Yunwu; Cao Zhiqiang; Wang Tongmin; Li Tingju

doi:10.15980/j.tzzz.2012.02.027

Views : 0 下载量: 222 CSCD: 4

Export
Share
Collection
Album

Electromagnetic Separation of Oxide Inclusions from Copper Alloy
Vol. 32, Issue 2, Pages: 176-179(2012)
Published： 2012 ，
DOI： 10.15980/j.tzzz.2012.02.027

扫描看全文

[1]李鹏超,左世斌,汤赟武,曹志强,王同敏,李廷举.铜合金中氧化物夹杂的电磁分离[J].特种铸造及有色合金,2012,32(02):176-179.

Li Pengchao, Zuo Shibin, Tang Yunwu, et al. Electromagnetic Separation of Oxide Inclusions from Copper Alloy. [J]. Special Casting & Nonferrous Alloys 32(2):176-179(2012)
[1]李鹏超,左世斌,汤赟武,曹志强,王同敏,李廷举.铜合金中氧化物夹杂的电磁分离[J].特种铸造及有色合金,2012,32(02):176-179. DOI： 10.15980/j.tzzz.2012.02.027.

Li Pengchao, Zuo Shibin, Tang Yunwu, et al. Electromagnetic Separation of Oxide Inclusions from Copper Alloy. [J]. Special Casting & Nonferrous Alloys 32(2):176-179(2012) DOI： 10.15980/j.tzzz.2012.02.027.

摘要

通过向Cu-10Sn合金中加入1%的Cu2O颗粒制备了含有SnxOy合金的材料

随后利用高频磁场的电磁分离技术成功将铜合金中的氧化物夹杂分离到分离器边缘。研究了分离器直径、磁感应强度、分离时间对分离效果的影响。试验结果表明

当分离器直径为12mm

磁感应强度为60mT

分离时间为60s时

氧化物夹杂的分离效果最好。

Abstract

SnxOy oxide inclusions were successfully separated from the Cu-10%Sn alloy with 1% Cu2O addition under the high frequency magnetic field. Influences of separating tube diameter

magnetic induction intensity and separating time on separation efficiency were investigated. The experimental results indicate that the desirable separation efficiency of oxide inclusions can be obtained for 60 s with the separating tube diameter of 12 mm and the magnetic induction intensity of 60 mT.