Numerical Simulation of Thermal Circulation in Die-casting Die for Casting Steering Column Bracket

Liu Zheng; Huo Chengpeng; Mao Pingli

doi:10.15980/j.tzzz.2012.02.002

Views : 0 下载量: 116 CSCD: 0

Export
Share
Collection
Album

Numerical Simulation of Thermal Circulation in Die-casting Die for Casting Steering Column Bracket
Vol. 32, Issue 2, Pages: 130-132(2012)
Published： 2012 ，
DOI： 10.15980/j.tzzz.2012.02.002

扫描看全文

[1]刘正,霍成鹏,毛萍莉.汽车转向管柱支架压铸模具热循环数值模拟[J].特种铸造及有色合金,2012,32(02):130-132.

Liu Zheng, Huo Chengpeng, Mao Pingli. Numerical Simulation of Thermal Circulation in Die-casting Die for Casting Steering Column Bracket. [J]. Special Casting & Nonferrous Alloys 32(2):130-132(2012)
[1]刘正,霍成鹏,毛萍莉.汽车转向管柱支架压铸模具热循环数值模拟[J].特种铸造及有色合金,2012,32(02):130-132. DOI： 10.15980/j.tzzz.2012.02.002.

Liu Zheng, Huo Chengpeng, Mao Pingli. Numerical Simulation of Thermal Circulation in Die-casting Die for Casting Steering Column Bracket. [J]. Special Casting & Nonferrous Alloys 32(2):130-132(2012) DOI： 10.15980/j.tzzz.2012.02.002.

摘要

利用FLOW-3D软件对镁合金汽车转向管柱支架压铸模具热循环效应进行数值模拟。设计两种不同的冷却水方案

通过模拟

分析了型腔内壁的温度分布和整个模具的温度分布

得出循环水道设计为弯曲结构时为较好的冷却水方案。

Abstract

Thermal circulation in the die-casting die for casting steering column bracket was simulated by the FLOW-3D software. Two cooling water schemes were designed. The temperature distributions of both inside-wall of die cavity and whole mold were analyzed. The simulated results show that circulated water channel with curve structure is the desirable design

which can be a reference to mold design and processing parameter selection.