Effect of Process Parameters on Interface Layer and Properties of   Liquid Aluminum/Steel

Zhou Shiquan  Xiong Weihao

doi:10.15980/j.tzzz.2000.02.006

Views : 0 下载量: 108 CSCD: 12

Export
Share
Collection
Album

Effect of Process Parameters on Interface Layer and Properties of Liquid Aluminum/Steel
Issue 2, Pages: 16-17(2000)
Published： 2000 ，
DOI： 10.15980/j.tzzz.2000.02.006

扫描看全文

[1]周世权,熊惟皓,付元植.工艺参数对液态铝与钢界面层及其性能的影响[J].特种铸造及有色合金,2000(02):16-17.

Zhou Shiquan Xiong Weihao. Effect of Process Parameters on Interface Layer and Properties of Liquid Aluminum/Steel. [J]. Special Casting & Nonferrous Alloys (2):16-17(2000)
[1]周世权,熊惟皓,付元植.工艺参数对液态铝与钢界面层及其性能的影响[J].特种铸造及有色合金,2000(02):16-17. DOI： 10.15980/j.tzzz.2000.02.006.

Zhou Shiquan Xiong Weihao. Effect of Process Parameters on Interface Layer and Properties of Liquid Aluminum/Steel. [J]. Special Casting & Nonferrous Alloys (2):16-17(2000) DOI： 10.15980/j.tzzz.2000.02.006.

摘要

采用复合凝固的工艺方法

研究了工艺参数对钢与铝复合结构的组织与性能的影响。结果表明

在良好的工艺及铝合金成分的条件下

利用钢中的铁向液态铝合金中的有限溶解及铁和铝在界面处的相互扩散

可得到性能良好的钢与铝复合结构

Abstract

Effect of parameters on microstructure and properties of steel/aluminum composite structure was investigated with composite solidificatong method. The results show that steel/aluminum composite structure with good property can be obtained by the iron finite solution in liquid aluminum alloy and iron aluminum mutual diffusion in the interface under the condition of effective technology and composition of aluminum alloy.