The CAD/CAM of the Complex Die for Foam Pattern in Lost Foam Process

Wu Zhichao  Ye Shengping  Wang Gengyun

doi:10.15980/j.tzzz.2000.02.004

Views : 0 下载量: 121 CSCD: 4

Export
Share
Collection
Album

The CAD/CAM of the Complex Die for Foam Pattern in Lost Foam Process
Issue 2, Pages: 10-12(2000)
Published： 2000 ，
DOI： 10.15980/j.tzzz.2000.02.004

扫描看全文

[1]吴志超,叶升平,王耕耘,方家骅,何世涛,钱国定.消失模铸造复杂发泡模模具CAD/CAM[J].特种铸造及有色合金,2000(02):10-12.

Wu Zhichao Ye Shengping Wang Gengyun. The CAD/CAM of the Complex Die for Foam Pattern in Lost Foam Process. [J]. Special Casting & Nonferrous Alloys (2):10-12(2000)
[1]吴志超,叶升平,王耕耘,方家骅,何世涛,钱国定.消失模铸造复杂发泡模模具CAD/CAM[J].特种铸造及有色合金,2000(02):10-12. DOI： 10.15980/j.tzzz.2000.02.004.

Wu Zhichao Ye Shengping Wang Gengyun. The CAD/CAM of the Complex Die for Foam Pattern in Lost Foam Process. [J]. Special Casting & Nonferrous Alloys (2):10-12(2000) DOI： 10.15980/j.tzzz.2000.02.004.

摘要

以典型零件为例

详细描述了消失模铸造复杂发泡模模具设计和制造过程

结果表明 :采用 CAD/ CAM技术

不仅大大提高了模具设计及制造效率

圆满完成了模具的设计制造任务

而且保证了模具的质量获得了用户的好评

Abstract

In this paper the design and manufacture of the complex tools for foam pattern in lost foam process were described by taking a typical part as an example.The result showed that not only the efficiency of the die design and manufacture was improved and the task was accomplished satisfactorily

but also the die′s quality was ensured fairly and earned consumer′s favorable comment by using CAD/CAM technology.