Research·Alloy Process | Views : 0 下载量: 8 CSCD: 0
  • Export

  • Share

  • Collection

  • Album

    • Effects of Withdrawal Rate during Thermally-controlled Solidification on Microstructure and Endurance Property of Equiaxed Ni-based Superalloy

    • 高温合金因其卓越的铸造性能和力学性能,成为发动机涡轮叶片和复杂热端部件的理想选择。近期研究关注抽拉速率对热控凝固工艺制备的等轴晶合金热处理组织及高温高压下持久性能的影响。随着抽拉速率增加,合金显微缩松增多,晶粒尺寸和γ/γ′共晶减小,促进了γ′相的析出与长大。在1050℃和120MPa条件下,持久断裂寿命随抽拉速率增加而显著降低。分析显示,晶粒细化、γ′相筏排化程度增加、缩松导致微裂纹快速萌生,以及碎化碳化物对裂纹扩展的阻碍作用减弱,共同导致合金持久性能下降。这一发现为高温合金的制造和应用提供了重要参考。
    • Vol. 44, Issue 4, Pages: 541-545(2024)   

      Published: 20 April 2024

    • DOI: 10.15980/j.tzzz.2024.04.020     

    扫 描 看 全 文

  • CAO G Q,SHEN Y Q,LI G,et al. Effects of withdrawal rate during thermally-controlled solidification on microstructure and endurance property of equiaxed ni-based superalloy[J]. Special Casting & Nonferrous Alloys,2024,44(4):541-545. DOI: 10.15980/j.tzzz.2024.04.020.
  •  
  •  
Alert me when the article has been cited
提交

相关作者

仝建民 北京航空材料研究院;清华大学;北京航空材料研究院清华大学
黄朝晖 北京航空材料研究院;清华大学;北京航空材料研究院清华大学
Zhang Qiang 1 Huang Zhaohui 1 Tong Jianmin 2 北京航空材料研究院;清华大学;北京航空材料研究院清华大学
Gong Shengkai   北京航空航天大学材料科学与工程学院  
Kang Junguo   北京航空航天大学材料科学与工程学院  
Sun Yuejun   北京航空航天大学材料科学与工程学院  
He Jicheng 东北大学材料电磁过程教育部重点实验室
Jiang En 东北大学材料电磁过程教育部重点实验室

相关机构

北京航空材料研究院清华大学
Tsinghua University
Beijing Institute of Aeronautical Materials
School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics
Key Laboratory for Electromagnetic Processing of Materials,Education of Ministry,Northeastern University
0