Numerical Simulation of Solidification Defects in Titanium Alloy by Vertical Centrifugal Investment Casting

Shi Junke; Liao Dunming; Chen Yuhao; Chen Tao; Gu Jianhua

doi:10.15980/j.tzzz.2022.11.009

Views : 0 下载量: 39 CSCD: 0

PDF
Export
Share
Collection
Album

Numerical Simulation of Solidification Defects in Titanium Alloy by Vertical Centrifugal Investment Casting
Vol. 42, Issue 11, Pages: 1360-1365(2022)
Published： 2022 ，
DOI： 10.15980/j.tzzz.2022.11.009

扫描看全文

Shi Junke, Liao Dunming, Chen Yuhao, et al. Numerical Simulation of Solidification Defects in Titanium Alloy by Vertical Centrifugal Investment Casting. [J]. Special Casting & Nonferrous Alloys 42(11):1360-1365(2022)
DOI：

Shi Junke, Liao Dunming, Chen Yuhao, et al. Numerical Simulation of Solidification Defects in Titanium Alloy by Vertical Centrifugal Investment Casting. [J]. Special Casting & Nonferrous Alloys 42(11):1360-1365(2022) DOI： 10.15980/j.tzzz.2022.11.009.

摘要

对立式离心铸造的自由表面模型进行分析，以等效液面下降法为理论基础，建立了一种基于等效高度区间的立式离心铸造凝固过程数值方法来模拟空缺体积分配方法，实现了立式离心铸造凝固缺陷的计算。分别在重力铸造与离心铸造工艺下，使用山字型铸件对立式离心铸造的缺陷计算结果进行验证。结果表明，基于等效高度区间的立式离心铸造凝固过程数值模拟空缺体积分配方法，可以实现对铸件离心铸造中缩松、缩孔缺陷的定量计算。

Abstract

The free surface model of vertical centrifugal casting was analyzed. Based on the equivalent liquid surface descent method

a vacancy volume distribution method for numerical simulation of solidification process by vertical centrifugal casting based on the equivalent height interval was established

and the calculation results of solidification defects by vertical centrifugal casting was achieved. The defect calculation results of vertical centrifugal casting were verified by 山 shaped casting under gravity casting and centrifugal casting

respectively. The results indicate that the quantitative calculation of shrinkage porosity and cavity defects in centrifugal casting can be realized through vacancy volume distribution method for numerical simulation of solidification process by vertical centrifugal casting based on equivalent height interval.