Production of ZL114A Alloy Shell Castings by Low Pressure Casting

Shan Jiali; Yin Jiaxin; Xu Zhifeng; Cai Changchun; Zhang Shouyin; Wang Zhitai; Wang Deqing

doi:10.15980/j.tzzz.2018.08.012

Views : 0 下载量: 357 CSCD: 5

Export
Share
Collection
Album

Production of ZL114A Alloy Shell Castings by Low Pressure Casting
Vol. 38, Issue 8, Pages: 856-859(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.08.012

扫描看全文

[1]单嘉立,尹家新,徐志锋,蔡长春,张守银,汪志太,王德清.低压铸造ZL114A铝合金舱段壳体铸件工艺研究[J].特种铸造及有色合金,2018,38(08):856-859.

Shan Jiali, Yin Jiaxin, Xu Zhifeng, et al. Production of ZL114A Alloy Shell Castings by Low Pressure Casting. [J]. Special Casting & Nonferrous Alloys 38(8):856-859(2018)
[1]单嘉立,尹家新,徐志锋,蔡长春,张守银,汪志太,王德清.低压铸造ZL114A铝合金舱段壳体铸件工艺研究[J].特种铸造及有色合金,2018,38(08):856-859. DOI： 10.15980/j.tzzz.2018.08.012.

Shan Jiali, Yin Jiaxin, Xu Zhifeng, et al. Production of ZL114A Alloy Shell Castings by Low Pressure Casting. [J]. Special Casting & Nonferrous Alloys 38(8):856-859(2018) DOI： 10.15980/j.tzzz.2018.08.012.

摘要

以ZL114A合金舱段壳体铸件为研究对象

对其铸造工艺进行设计

并通过相关的数值模拟和工艺试验分析

确定了局部激冷及较高压差下凝固的舱段壳体低压铸件工艺方案和工艺参数。对低压铸造成形ZL114A合金舱段壳体铸件的窗口部位进行剖切取样测试分析

发现经固溶和双级时效处理后

其抗拉强度为349 MPa

屈服强度为288 MPa

伸长率为7.7%

达到了设计要求。

Abstract

The casting scheme of ZL114 Aalloy cylindrical shell castings was designed according to the properties of alloy and the structural characteristic.The optimized process scheme and parameters of cabin shell was provided with local chilling and a higher pressure difference by related numerical simulation and process test analysis.The window position of the ZL114 Ahousing under low pressure casting was analyzed.The results reveal that after solid solution and dual-aging treatment

tensile strength

yield strength and elongation reach 349 MPa

288 MPa and 7.7%

respectively

meeting the design requirements.