Study on the Gating System of Permanent Mold Casting for Al Alloy

Liu Zhongfen

Views : 0 下载量: 306 CSCD: 7

Export
Share
Collection
Album

Study on the Gating System of Permanent Mold Casting for Al Alloy
Issue 5, Pages: 24-27(1991)
Published： 1991 ，
DOI：

扫描看全文

[1]刘仲锋.铝合金金属型铸造浇注系统设计研究[J].特种铸造及有色合金,1991(05):24-27.

Liu Zhongfen. Study on the Gating System of Permanent Mold Casting for Al Alloy. [J]. Special Casting & Nonferrous Alloys (5):24-27(1991)
[1]刘仲锋.铝合金金属型铸造浇注系统设计研究[J].特种铸造及有色合金,1991(05):24-27. DOI：

Liu Zhongfen. Study on the Gating System of Permanent Mold Casting for Al Alloy. [J]. Special Casting & Nonferrous Alloys (5):24-27(1991) DOI：

摘要

本文对铝合金金属型铸造用浇注系统进行了系统地研究

提出了几类浇注系统的选用原则。试验证明

蛇形浇注系统是最佳形式。本文的研究结果在铸造X195活塞中进行了生产验证

取得了良好的应用效果。

Abstract

The gates of permanent mold casting for Al alloy are studied in this paper

and the method for selecting them is presented. It has shown that the S-shaped gate is the best type for Al alloy castings. The result has been proved right in producing X195 Al alloy pistons