Study on the "Critical Cooling Rates of Saturated Modification" Phenomenon in Al—Si Eutectic Alloys Modified by Strontium

Chen Yiqing

Views : 0 下载量: 80 CSCD: 2

Export
Share
Collection
Album

Study on the "Critical Cooling Rates of Saturated Modification" Phenomenon in Al—Si Eutectic Alloys Modified by Strontium
Issue 5, Pages: 15-16(1991)
Published： 1991 ，
DOI：

扫描看全文

[1]陈翌庆,李庆春,曾松岩,张虎.锶变质铝硅共晶合金中“临界饱和变质冷却速度”现象的研究[J].特种铸造及有色合金,1991(05):15-16+11.

Chen Yiqing. Study on the "Critical Cooling Rates of Saturated Modification" Phenomenon in Al—Si Eutectic Alloys Modified by Strontium. [J]. Special Casting & Nonferrous Alloys (5):15-16(1991)
[1]陈翌庆,李庆春,曾松岩,张虎.锶变质铝硅共晶合金中“临界饱和变质冷却速度”现象的研究[J].特种铸造及有色合金,1991(05):15-16+11. DOI：

Chen Yiqing. Study on the "Critical Cooling Rates of Saturated Modification" Phenomenon in Al—Si Eutectic Alloys Modified by Strontium. [J]. Special Casting & Nonferrous Alloys (5):15-16(1991) DOI：

摘要

采用新型的连续定向凝固装置考察了不同冷却速度下锶变质Al—Si共晶合金的共晶硅形貌及合金的强度性能。研究发现:当冷却速度大于某一阈值后

继续增加合金的冷却速度

共晶硅尺寸几乎不再变化;强度值也不再增加。且提出了“临界饱和变质冷却速度”的概念。

Abstract

The new type of continuous directional solidification apparatus is applied to Investigate the morphology of eutectic silicon and the strength of eutectic Al-Si alloys modified by strontium at different rates of cooling. The study indicates when cooling rate is above a given value

further increasing cooling rates will neither change the diameter of the eutectic silicon nor increase the strength of the alloys. The concept of "crictical cooling rates of saturated modification "is put forward.

关键词

连续定向凝固锶变质Al-Si共晶合金饱和变质

Keywords

连续定向凝固锶变质Al-Si共晶合金饱和变质

references

Alert me when the article has been cited

提交

暂无数据