On the Friction Characteristic between Plunger and Sleeve in the Die Casting

Views : 0 下载量: 95 CSCD: 12

Export
Share
Collection
Album

On the Friction Characteristic between Plunger and Sleeve in the Die Casting
Issue 4, (1996)
Published： 1996 ，
DOI：

扫描看全文

[1]卢宏远,徐永博,范琦,唐慧波,邝允烈.压射冲头与压室间的摩擦特性[J].特种铸造及有色合金,1996(04):21-23.

Lu Hongyuan Xu Yongbo Fan Qi Tang Huibo Kuang Yunlie. On the Friction Characteristic between Plunger and Sleeve in the Die Casting. [J]. Special Casting & Nonferrous Alloys (4).(1996)
[1]卢宏远,徐永博,范琦,唐慧波,邝允烈.压射冲头与压室间的摩擦特性[J].特种铸造及有色合金,1996(04):21-23. DOI：

Lu Hongyuan Xu Yongbo Fan Qi Tang Huibo Kuang Yunlie. On the Friction Characteristic between Plunger and Sleeve in the Die Casting. [J]. Special Casting & Nonferrous Alloys (4).(1996) DOI：

摘要

利用专用模拟装置，研究了载荷、温度及润滑剂等因素对压射冲头与压室间摩擦力的影响，并根据试验结果及摩擦学原理，对实际压射过程的摩擦特性进行了探讨

Abstract

The effects of the load

temperature and lubricant on the friction features between the plunger and sleeve of diecasting are investigated with a special friction detector

and the real friction characteristic is analysed according to the experimental results and the knowledge of lubrication.

关键词

压铸润滑摩擦特性

Keywords

Die CastingLubricantFriction Feature

references

Alert me when the article has been cited

提交

相关文章

Numerical Simulation of Die Casting Process for Motor Housing and Prediction of Thick Wall Defects

Integrated Aluminum Alloy Die Casting Process for Automobile Body

Optimization of High and Low Speed Switching Position of Injection in High Pressure Casting Main Housing of the Gearbox

Numerical Simulation of Die Casting Process for Mg-xSm-0.3Zn Magnesium Alloys

Expert System for Design of Process Parameters in Die Casting and Identification of Defects

相关作者

Ji Xin 浙江理工大学机械工程学院;浙大宁波理工学院机电与能源动力学院

Liu Lijun 浙大宁波理工学院机电与能源动力学院

Jia Zhixin 浙大宁波理工学院机电与能源动力学院

Li Jiqiang 浙大宁波理工学院机电与能源动力学院

Liao Dahua 宁波众鑫压铸模具有限公司

Fang Jie 宁波众鑫压铸模具有限公司

Zhao Jisong 上海多利汽车配件有限公司

Wu Guangjian 盐城多利汽车零部件有限公司

相关机构

School of Mechanical Engineering, Zhejiang Science and Technology University

School of Mechatronics and Energy Power, Ningbo Institute of Technology, Zhejiang University

Ningbo Zhongxin Casting Mould Co., Ltd.

Shanghai Duoli Automotive Parts Co.， Ltd.

Yancheng Duoli Automotive Parts Co.， Ltd.

⁰