Pore  Free Die Casting

Wang Zhiqing

Views : 0 下载量: 260 CSCD: 20

Export
Share
Collection
Album

Pore Free Die Casting
Issue 3, (1996)
Published： 1996 ，
DOI：

扫描看全文

[1]汪之清.充氧压铸[J].特种铸造及有色合金,1996(03):40-43.

Wang Zhiqing. Pore Free Die Casting. [J]. Special Casting & Nonferrous Alloys (3).(1996)
[1]汪之清.充氧压铸[J].特种铸造及有色合金,1996(03):40-43. DOI：

Wang Zhiqing. Pore Free Die Casting. [J]. Special Casting & Nonferrous Alloys (3).(1996) DOI：

摘要

充氧压铸可消除压铸件的气孔，使压铸件可以热处理或焊接。铸态铝合金充氧压铸件的力学性能有明显改进：拉伸强度增加了３０％，延伸率增加了１５０％～２００％，经热处理后，拉伸强度可增加３０％，屈服强度可增加１００％，冲击韧性可提高１００％或更多。充氧压铸已在铝合金、镁合金压铸件的生产中得到应用，如车轮、制动器缸体、液压传动阀体以及热交换器等。充氧压铸的Ａｌ－Ｓｉ１２ＣｕＦｅ铝合金车轮经Ｔ６热处理后，其σｂ＝２７５ＭＰａ，σｓ＝２２１ＭＰａ，δ＝７．０％，其疲劳寿命与轧制的５４５４铝合金轮子的疲劳寿命相似

Abstract

Using pore free die casting

the castings with porosity free

heat treatable and weldable features are given. Mechanical properties of Al casting are improved significantly: Tensile strength and elongation as cast are increased by 30% and 150%￣200% separately. Tensile strength

yield strength and impact toughness by heat treatment are increased by 30%

100% and more than 100% separately. Many Al or Mg alloy die castings

such as the auto wheel

the brake cylinder

the hydraulic valve

the actuator body and the heat exchanger

have been produced. Being made in pore free die casting and heat treated by T6

Al Si12CuFe alloy wheel has follow properties: σ b=276 MPa

σ s=221 MPa

δ =7.0% and a similar fatigue characteristic to the rolled 5454 Al wheel.