Friction and Wear Properties of High  Strength Zn  Al Alloy

Zhang Yuping  Zhang Yan  Li Yi\ Sun Gang

Views : 0 下载量: 251 CSCD: 16

Export
Share
Collection
Album

Friction and Wear Properties of High Strength Zn Al Alloy
Issue 3, (1996)
Published： 1996 ，
DOI：

扫描看全文

[1]张玉平,张琰,李翼,孙钢.高强度锌铝合金摩擦磨损特性的试验研究[J].特种铸造及有色合金,1996(03):7-9.

Zhang Yuping Zhang Yan Li Yi\ Sun Gang. Friction and Wear Properties of High Strength Zn Al Alloy. [J]. Special Casting & Nonferrous Alloys (3).(1996)
[1]张玉平,张琰,李翼,孙钢.高强度锌铝合金摩擦磨损特性的试验研究[J].特种铸造及有色合金,1996(03):7-9. DOI：

Zhang Yuping Zhang Yan Li Yi\ Sun Gang. Friction and Wear Properties of High Strength Zn Al Alloy. [J]. Special Casting & Nonferrous Alloys (3).(1996) DOI：

摘要

采用ＭＭ２００磨损试验机，测定和对比了铸造锌铝合金（ＺＺｎＡｌ２７Ｃｕ２Ａ和ＺＺｎＡｌ２７Ｃｕ２Ｄ）和工业上常用铜合金（ＺＣｕＳｎ６Ｚｎ６Ｐｂ３，ＺＣｕＡ１１０Ｆｅ３和ＺＣｕＺｎ３３Ｍｎ２Ｐｂ２）的摩擦磨损特性。试验测定了合金在不同载荷和转速条件下的摩擦系数和磨损量及其对配对材料的磨损，结果表明，锌铝合金是一种更适于在重载低速条件下使用的减摩材料

Abstract

The friction and wear properties of 2 kinds of high strength Zn Al alloys and 3 kinds of Cu alloys are demonstrated. Under different lood and rotative velocity

the friction factor and abrasion wear of the alloys and their coupling samples are given. The results show that the Zn Al alloy is an excellent anti friction meterial applied to heavy load and low rotation.