Test Research on Fabrication of TiC/ZA43 Composite by Casting Technique

Liu Jinshui  Xiao Hanning  Shu Zhen  Jiang Bing  Xiang Pinfeng  Ye Jiuxin

Views : 0 下载量: 38 CSCD: 13

Export
Share
Collection
Album

Test Research on Fabrication of TiC/ZA43 Composite by Casting Technique
Issue 3, (1998)
Published： 1998 ，
DOI：

扫描看全文

[1]刘金水,肖汉宁,舒震,蒋冰,项品峰,叶久新.铸造法制备TiC/ZA43复合材料的试验研究[J].特种铸造及有色合金,1998(03):26-28.

Liu Jinshui Xiao Hanning Shu Zhen Jiang Bing Xiang Pinfeng Ye Jiuxin. Test Research on Fabrication of TiC/ZA43 Composite by Casting Technique. [J]. Special Casting & Nonferrous Alloys (3).(1998)
[1]刘金水,肖汉宁,舒震,蒋冰,项品峰,叶久新.铸造法制备TiC/ZA43复合材料的试验研究[J].特种铸造及有色合金,1998(03):26-28. DOI：

Liu Jinshui Xiao Hanning Shu Zhen Jiang Bing Xiang Pinfeng Ye Jiuxin. Test Research on Fabrication of TiC/ZA43 Composite by Casting Technique. [J]. Special Casting & Nonferrous Alloys (3).(1998) DOI：

摘要

以Ｔｉ，Ａｌ，Ｃ粉末为原料，采用ＸＤ法与铸造法相结合的工艺制备了体积分数为５％的ＴｉＣ／ＺＡ４３复合材料，研究了ＴｉＣ／ＺＡ４３复合材料的铸态组织以及增强相ＴｉＣ颗粒的尺寸与分布。试验结果表明：ＴｉＣ在复合材料中具有良好的稳定性，且随着Ａｌ－ＴｉＣ预制块加入温度的提高，颗粒分布更加均匀，晶粒细化效果更为显著。

Abstract

5%TiC/ZA43 composites were prepared with Ti

C powder by combining the advantages of both XD and casting techniques. The ascast microstructures of TiC/ZA43 composite as well as the size and distribution of TiC particulate rinforcement phase were studied. It was found that TiC particulate in composite exhibited excellent stability

the distribution of TiC particulate in matrix became more homogeneous and the microstructures became finer with increase of the prepared AlTiC addition temperature.