Influence of Individual Addition of Ti, Ce and Mg on Solid State Phase Transformation of Zn-Al Alloys

Views : 0 下载量: 165 CSCD: 14

Influence of Individual Addition of Ti, Ce and Mg on Solid State Phase Transformation of Zn-Al Alloys
Issue 2, (1998)
Published： 1998 ，
DOI：

扫描看全文

[1]汪沛雨,徐淑清,薛新民.Ti,Ce和Mg对Zn-Al合金固态相变的影响[J].特种铸造及有色合金,1998(02):9-11.

Wang Peiyu Xu Shuqing Xue Xinmin. Influence of Individual Addition of Ti, Ce and Mg on Solid State Phase Transformation of Zn-Al Alloys. [J]. Special Casting & Nonferrous Alloys (2).(1998)
[1]汪沛雨,徐淑清,薛新民.Ti,Ce和Mg对Zn-Al合金固态相变的影响[J].特种铸造及有色合金,1998(02):9-11. DOI：

Wang Peiyu Xu Shuqing Xue Xinmin. Influence of Individual Addition of Ti, Ce and Mg on Solid State Phase Transformation of Zn-Al Alloys. [J]. Special Casting & Nonferrous Alloys (2).(1998) DOI：

研究在Ｚｎ－Ａｌ合金中分别加入Ｔｉ，Ｃｅ和Ｍｇ等元素，对合金固态相变的影响。研究结果表明：Ｔｉ，Ｃｅ和Ｍｇ对Ｚｎ－Ａｌ合金人工时效时的沉淀析出起到不同程度的抑制作用。

Influence of individual addition titanium

cerium and magnesium on solid state phase transformation of Zn-Al alloys was studied in the thesis. The results show that Ti

Ce and Mg can restrain the precipitation of the alloys with varying degrees in artificial ageing.

固态相变人工时效沉淀析出

Solid State Phase TransformationArtificial AgeingPrecipitation

Alert me when the article has been cited

提交