Fabrication and Microstructure of Casting Al  Pb Sliding Bearing Alloy

Sun Daren  Yang Xiaohong  Zhang Mingzhe  Cao Zhanyi  Lu You  Liu Yongbing

Views : 0 下载量: 137 CSCD: 32

Export
Share
Collection
Album

Fabrication and Microstructure of Casting Al Pb Sliding Bearing Alloy
Issue 5, (1998)
Published： 1998 ，
DOI：

扫描看全文

[1]孙大仁,杨晓红,曹占义,陆有,刘勇兵.铸造铝铅滑动轴承合金的制备及其显微组织[J].特种铸造及有色合金,1998(05):26-28.

Sun Daren Yang Xiaohong Zhang Mingzhe Cao Zhanyi Lu You Liu Yongbing. Fabrication and Microstructure of Casting Al Pb Sliding Bearing Alloy. [J]. Special Casting & Nonferrous Alloys (5).(1998)
[1]孙大仁,杨晓红,曹占义,陆有,刘勇兵.铸造铝铅滑动轴承合金的制备及其显微组织[J].特种铸造及有色合金,1998(05):26-28. DOI：

Sun Daren Yang Xiaohong Zhang Mingzhe Cao Zhanyi Lu You Liu Yongbing. Fabrication and Microstructure of Casting Al Pb Sliding Bearing Alloy. [J]. Special Casting & Nonferrous Alloys (5).(1998) DOI：

摘要

利用一种新的铸造技术，使高达４０％的铅混合到铝合金中，然后用普通的浇铸方法生产铸造铝－铅合金。在实验中，探讨了其最佳工艺参数，并利用光学显微镜，扫描电镜，定量金相等技术研究了铝含量和合金元素对其显微组织结构的影响。

Abstract

In this study

A new foundry technique has been developed in which up to 40% lead can be delivered into the molten aluminium alloy

followed by the alloy pouring with the conventional casting method. The process parameters were investigated. The effects of the lead content and the alloy elements on the microstructures of Al Pb alloy were discussed based on the results of optical microscope

SEM and quantitative metallography observations.