Measure for Resolving Leakage of 016 Gearbox Transmission Case

Views : 0 下载量: 20 CSCD: 1

扫描看全文

[1]田洪福,朱振国,李鹏昊,惠晓微,董显明.016变速箱前壳漏压问题的解决途径[J].特种铸造及有色合金,1998(02):39-41.

Tian Hongfu Zhu Zhenguo Li Penghao Hui Xiaowei. Measure for Resolving Leakage of 016 Gearbox Transmission Case. [J]. Special Casting & Nonferrous Alloys (2).(1998)
[1]田洪福,朱振国,李鹏昊,惠晓微,董显明.016变速箱前壳漏压问题的解决途径[J].特种铸造及有色合金,1998(02):39-41. DOI：

Tian Hongfu Zhu Zhenguo Li Penghao Hui Xiaowei. Measure for Resolving Leakage of 016 Gearbox Transmission Case. [J]. Special Casting & Nonferrous Alloys (2).(1998) DOI：

０１６变速箱前壳尺寸大，形状复杂，质量要求高。本文主要从合金熔化、模具浇注和排溢系统以及压铸工艺参数三个方面论述了引起变速箱前壳铸件漏压的内部气孔的产生原因，并提出了相应的解决办法，从而提高该件的质量。

016 gearbox transmission case is of large size and complex shape

and with high quality requirements. This article from three aspects （melting

gating and overflowwell and airvent system

diecasting technology parameters）

discusses the causes of porosity formation that result in leakage. Accordingly

measures for resolving the problem are proposed.

016变速箱前壳漏压

016 GearboxTransmission CaseLeakage

Alert me when the article has been cited

提交

暂无数据