Research on Intermetallic Compound Reinforeced Aluminium Alloyby InSitu Reactive Synthesis

Zhou ZhengWang JianDing Peidao

Views : 0 下载量: 62 CSCD: 1

Export
Share
Collection
Album

Research on Intermetallic Compound Reinforeced Aluminium Alloyby InSitu Reactive Synthesis
Issue 3, (1999)
Published： 1999 ，
DOI：

扫描看全文

[1]周正,王健,丁培道.金属间化合物增强铝合金的原位反应复合研究[J].特种铸造及有色合金,1999(03):11-13.

Zhou ZhengWang JianDing Peidao. Research on Intermetallic Compound Reinforeced Aluminium Alloyby InSitu Reactive Synthesis. [J]. Special Casting & Nonferrous Alloys (3).(1999)
[1]周正,王健,丁培道.金属间化合物增强铝合金的原位反应复合研究[J].特种铸造及有色合金,1999(03):11-13. DOI：

Zhou ZhengWang JianDing Peidao. Research on Intermetallic Compound Reinforeced Aluminium Alloyby InSitu Reactive Synthesis. [J]. Special Casting & Nonferrous Alloys (3).(1999) DOI：

摘要

通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。通过金相、扫描电镜、Ｘ射线衍射及显微硬度计研究了复合层的组织结构及性能。结果表明金属间化合物界面向铝合金基体中移动。

Abstract

Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.Microstructure and properties are studied by means of metallograph

SEM

XRD and microhardness.The results showed that interface of intermetallic compound foam can move into aluminium alloy matrix.