The Dissolution of Oxygen in Ti6Al4V Melt during Vacuum Melting

SuYanqingRen ZhijiangGuo JingjieJia Jun

Views : 0 下载量: 202 CSCD: 1

Export
Share
Collection
Album

The Dissolution of Oxygen in Ti6Al4V Melt during Vacuum Melting
Issue 2, (1999)
Published： 1999 ，
DOI：

扫描看全文

[1]苏彦庆,任志江,郭景杰,贾均.Ti-6Al-4V合金真空熔炼过程中氧元素的溶解[J].特种铸造及有色合金,1999(02):16-18.

SuYanqingRen ZhijiangGuo JingjieJia Jun. The Dissolution of Oxygen in Ti6Al4V Melt during Vacuum Melting. [J]. Special Casting & Nonferrous Alloys (2).(1999)
[1]苏彦庆,任志江,郭景杰,贾均.Ti-6Al-4V合金真空熔炼过程中氧元素的溶解[J].特种铸造及有色合金,1999(02):16-18. DOI：

SuYanqingRen ZhijiangGuo JingjieJia Jun. The Dissolution of Oxygen in Ti6Al4V Melt during Vacuum Melting. [J]. Special Casting & Nonferrous Alloys (2).(1999) DOI：

摘要

建立了间隙元素在钛合金中溶解的热力学模型，以此计算了氧在钛合金中的溶解度，并分析了影响氧在钛合金中溶解度的因素。计算结果表明，熔体温度对Ｔｉ－６Ａｌ－４Ｖ合金的氧溶解度影响较小，而熔炼室氧分压是决定氧含量的主要因素。计算结果与试验结果一致

Abstract

The thermodynamic model of the dissolution of oxygen in Ti6Al4V alloy was set up.Based on the model the oxygen solubility in Tialloys was calculated and the factors influcing on oxygen solubility were analyzed.The calculation results show that the temperature of Ti6Al4V alloy melt has little effect on oxygen dissolution while the oxygen partial pressure in the melting chamber is the main factor to determine the oxygen dissolution in Ti alloy.The calculated results are accordant with the experimental results.