Low Pressure Die Casting for Side Disk in Textile Machine

Views : 0 下载量: 27 CSCD: 4

Export
Share
Collection
Album

Low Pressure Die Casting for Side Disk in Textile Machine
Issue 1, (1999)
Published： 1999 ，
DOI：

扫描看全文

[1]丁苏沛,于收见,耿钧明.纺机织轴边盘的金属型低压铸造[J].特种铸造及有色合金,1999(01):29-30.

Ding Supei Yu Shoujian. Low Pressure Die Casting for Side Disk in Textile Machine. [J]. Special Casting & Nonferrous Alloys (1).(1999)
[1]丁苏沛,于收见,耿钧明.纺机织轴边盘的金属型低压铸造[J].特种铸造及有色合金,1999(01):29-30. DOI：

Ding Supei Yu Shoujian. Low Pressure Die Casting for Side Disk in Textile Machine. [J]. Special Casting & Nonferrous Alloys (1).(1999) DOI：

摘要

介绍了采用金属型低压铸造生产边盘所涉及的设备、模具、工艺，并对产品质量和经济效益进行了分析。

Abstract

The side disk is one of important parts of textile machine. By means of low pressure die casting process

a good result is obtained for the part. The paper refers to the events

involving equipment

die

technology

casting quality and economic benefit analysis

etc.

关键词

纺机边盘低压铸造

Keywords

Textile MachineSide DiskLow Pressure Die Casting

references

Alert me when the article has been cited

提交

相关文章

Low Pressure Die Casting for Side Disk in Textile Machine

It Control the Pressure Maintaining and the Time-Delay in the Low Pressure Die Casting to Substituting a Digit Thermometer for a Time Relay

Practical Algorithm for Time Step in Low Pressure Die Casting Solidification Simulation

An Approach on Some Technical Aspects of Al Alloy Hub by Low Pressure Die Casting

Intelligent Control of Low Pressure Die CastingBased on Wavelet Thermal Analysis and Multisensor Data Fusion

相关作者

耿钧明

于收见

丁苏沛

黄秀琦哈尔滨工程大学;沈阳工业学院;哈尔滨工程大学沈阳工业学院

Wang Dong 哈尔滨工程大学;沈阳工业学院;哈尔滨工程大学沈阳工业学院

贾春红哈尔滨工程大学;沈阳工业学院;哈尔滨工程大学沈阳工业学院

郭广思哈尔滨工程大学;沈阳工业学院;哈尔滨工程大学沈阳工业学院

李玉梅哈尔滨工程大学;沈阳工业学院;哈尔滨工程大学沈阳工业学院

相关机构

Guo Guangsi

Li Yuhai

Haerbin Engineering University) Jia Chunhong

清华大学戴卡轮毂公司

戴卡轮毂公司

⁰