Preventing Aluminum Pattern Plate from Surface Sinking with Pressurized Solidification in Ceramic Mold

Shen Huiming

Views : 0 下载量: 67 CSCD: 2

Export
Share
Collection
Album

Preventing Aluminum Pattern Plate from Surface Sinking with Pressurized Solidification in Ceramic Mold
Issue 1, (1999)
Published： 1999 ，
DOI：

扫描看全文

[1]沈惠民.用加压凝固工艺防止精铸铝模板表面缩凹[J].特种铸造及有色合金,1999(01):27-28.

Shen Huiming. Preventing Aluminum Pattern Plate from Surface Sinking with Pressurized Solidification in Ceramic Mold. [J]. Special Casting & Nonferrous Alloys (1).(1999)
[1]沈惠民.用加压凝固工艺防止精铸铝模板表面缩凹[J].特种铸造及有色合金,1999(01):27-28. DOI：

Shen Huiming. Preventing Aluminum Pattern Plate from Surface Sinking with Pressurized Solidification in Ceramic Mold. [J]. Special Casting & Nonferrous Alloys (1).(1999) DOI：

摘要

采用加压凝固工艺，并结合在模板厚大部位安放工艺芯和内冷铁，成功地消除了陶瓷型精铸铝模板的缩孔，缩松及表面缩凹等缺陷。

Abstract

The shrinkage void

porosity and surface sinking in Al pattern plate have been eliminated by means of pressurized solidification in connection with technological core and inner chill in heavy thickness in ceramic mold.

关键词

加压凝固表面缩凹陶瓷型精铸铝模板

Keywords

Pressurized SolidificationSurface SinkingCeramic Mold CastingAluminum Alloy Pattern Plate

references

Alert me when the article has been cited

提交

Analysis and Preventive Measures on Welding Repair Problem in Gypsum Mould Precision Casting Al Alloy

Microstructure and Properties of ZM6 Alloy in Pressurized Solidification

Preventing Aluminum Pattern Plate from Surface Sinking with Pressurized Solidification in Ceramic Mold

DOI：

摘要

Abstract

关键词

Keywords

references