Situation and Prospact of FM（EPC） Process in China

Liang Guangze

Views : 0 下载量: 259 CSCD: 25

Export
Share
Collection
Album

Situation and Prospact of FM（EPC） Process in China
Issue 1, (1999)
Published： 1999 ，
DOI：

扫描看全文

[1]粱光泽.中国实型铸造的现状与发展前景[J].特种铸造及有色合金,1999(01):49-51.

Liang Guangze. Situation and Prospact of FM（EPC） Process in China. [J]. Special Casting & Nonferrous Alloys (1).(1999)
[1]粱光泽.中国实型铸造的现状与发展前景[J].特种铸造及有色合金,1999(01):49-51. DOI：

Liang Guangze. Situation and Prospact of FM（EPC） Process in China. [J]. Special Casting & Nonferrous Alloys (1).(1999) DOI：

摘要

实型（消失模）铸造在我国虽已有３３年历史，但真正获得较快发展的是８０年代末中国铸造协会实型铸造专业委员会成立（当时仅１８家会员单位）后，尤其是近几年发展更为迅速。据不完全统计，现今在我国从事这项新技术研究和应用的约有１１０余家单位，是１９８８年中国铸造协会实型铸造专业委员会成立时的６倍。其中：研究院所和高等院校有１４家，消失模铸造原辅材料和专用设备生产厂点有１５家。１９９７年中国实型（消失模）铸件产量近２５８００ｔ，比１９９５年产量增加１倍（其中９８％是黑色金属铸件），但仅占现有生产能力的１６％；可见，中国消失模铸造的发展前景是十分可观的。

Abstract

FM（EPC） has been developed for 33 years in China. In practice

however

a rapid development was obtained just after the Foundry Association Full Mold Casting Committee was founded at the end of this 80’s （at that time only 18 members registered in the Committee）

espccially in the recent years. As shown in an incomplete statistic

at present there are about 110 groups working on the research and application of this kind of new technology

which is about 6 times the figure when the Committee was founded

Among them are 14 high academies or research institutes and 15 companies or plants for raw materials

auxiliary materials

and exclusive facilities. In 1997

the output of EPC castings runs up to 25 800 t in China

as is 2 times as much as in 1995（98% of the output is of ferrous castings） Considering that it is only 16% of the curent throughput

this kind of new lechnology is very promising in China.