Processing Approach for Small Cylindric Carbon Steel Casting in Investment Casting

Wen Rongsheng  Liu Huiping  Chen Cihao

Views : 0 下载量: 104 CSCD: 1

Export
Share
Collection
Album

Processing Approach for Small Cylindric Carbon Steel Casting in Investment Casting
Issue 6, Pages: 41-42(2001)
Published： 2001 ，
DOI：

扫描看全文

[1]温嵘生,,,,,,,,,,刘徽平,,,,,,,,,,陈慈诰.小型圆筒形碳钢铸件熔模铸造工艺探讨[J].特种铸造及有色合金,2001(06):41-42+0.

Wen Rongsheng Liu Huiping Chen Cihao. Processing Approach for Small Cylindric Carbon Steel Casting in Investment Casting. [J]. Special Casting & Nonferrous Alloys (6):41-42(2001)
[1]温嵘生,,,,,,,,,,刘徽平,,,,,,,,,,陈慈诰.小型圆筒形碳钢铸件熔模铸造工艺探讨[J].特种铸造及有色合金,2001(06):41-42+0. DOI：

Wen Rongsheng Liu Huiping Chen Cihao. Processing Approach for Small Cylindric Carbon Steel Casting in Investment Casting. [J]. Special Casting & Nonferrous Alloys (6):41-42(2001) DOI：

摘要

对一些原来采用砂型铸造的小型圆筒形碳钢铸件

因铸造缺陷多、铸造废品率高

根据其H/D≤ 2 .0

且主要壁厚δ≤ 15mm

铸件单件质量 <10kg的特点

确定采用熔模铸造。试验比较了顶注式、底注式两种方案

试验表明

采用合理的底注式浇注系统和浇注工艺

能够获得质量较好的健全铸件

铸件的合格率可达到 90 %以上。

Abstract

Due to a great deal of casting defects and high rejected rate for small cylindric carbon steel casting with H/D ≤2.0

main wall thickness δ ≤15 mm and single piece weight <10 kg

it is determined to change casting in sand mold to in investment casting with both top and bottom pouring for experimental comparison. Results showed that sound casting and more than 90% qualified rate could be obtained using rational bottom gating system and pouring process.