Optimized Design for Cu-Cr Alloy Crystallizer in Continuous Casting

Wang Guiqing  Liu Jie  Zhang Xiaobo

Views : 0 下载量: 131 CSCD: 2

Export
Share
Collection
Album

Optimized Design for Cu-Cr Alloy Crystallizer in Continuous Casting
Issue 5, Pages: 39-40(2001)
Published： 2001 ，
DOI：

扫描看全文

[1]王贵清,,,,,,,,,,刘杰,,,,,,,,,,张晓波,,,,,,,,,,王自东,,,,,,,,,,刘杏,,,,,,,,,,胡汉起.连续铸造Cu-Cr合金结晶器优化设计[J].特种铸造及有色合金,2001(05):39-40+1.

Wang Guiqing Liu Jie Zhang Xiaobo. Optimized Design for Cu-Cr Alloy Crystallizer in Continuous Casting. [J]. Special Casting & Nonferrous Alloys (5):39-40(2001)
[1]王贵清,,,,,,,,,,刘杰,,,,,,,,,,张晓波,,,,,,,,,,王自东,,,,,,,,,,刘杏,,,,,,,,,,胡汉起.连续铸造Cu-Cr合金结晶器优化设计[J].特种铸造及有色合金,2001(05):39-40+1. DOI：

Wang Guiqing Liu Jie Zhang Xiaobo. Optimized Design for Cu-Cr Alloy Crystallizer in Continuous Casting. [J]. Special Casting & Nonferrous Alloys (5):39-40(2001) DOI：

摘要

利用连续定向凝固设备成功地制备了具有轴向纤维状柱状晶组织的Cu Cr合金铜棒

在试验过程中通过调整工艺参数

对结晶器的形状、高度以及结晶器与拉棒的间隙进行了优化。结果表明 :用这种结晶器可以拉出表面质量优良的合金铜棒

Abstract

Cu Cr alloy bar with axial fibre column crystal structure was prepared successfully by continuous unidirectional solidification device. The shape

height of crystallizer and the gap between crystallizer and drawn bar were optimized through adjusting process parameters during experimental procedure. The results showed that the Cu Cr alloy bar with excellent surface quality was produced using the optimized crystallizer.

关键词

连续定向凝固Cu-Cr合金结晶器

Keywords

references

Alert me when the article has been cited

提交

Numerical Simulation for Influence of Strip Drawing Velocity on the Flow Field in the Crystallizer during Inverse Solidification

Numerical Simulation of System Power and Characteristics of Magnetic Field in Round billet Electromagnetic Soft-Contact Continuous Casting Process

Controlling Ways of Mg Segregation Layer Thickness in 5182 Al-Mg Alloy Ingot