Application of Numerical Simulation to Eliminate Shrinkage Hole in the Ductile Iron Hub Casting

Long Wenyuan  Cai Qizhou  Wei Bokang  Fan Zitian

Views : 0 下载量: 181 CSCD: 1

Export
Share
Collection
Album

Application of Numerical Simulation to Eliminate Shrinkage Hole in the Ductile Iron Hub Casting
Issue 5, Pages: 20-21(2003)
Published： 2003 ，
DOI：

扫描看全文

[1]龙文元,蔡启舟,魏伯康,樊自田,梅俊,龚萍,王瑞平.数值模拟在消除球墨铸铁轮毂缩孔中的应用[J].特种铸造及有色合金,2003(05):20-21+66.

Long Wenyuan Cai Qizhou Wei Bokang Fan Zitian. Application of Numerical Simulation to Eliminate Shrinkage Hole in the Ductile Iron Hub Casting. [J]. Special Casting & Nonferrous Alloys (5):20-21(2003)
[1]龙文元,蔡启舟,魏伯康,樊自田,梅俊,龚萍,王瑞平.数值模拟在消除球墨铸铁轮毂缩孔中的应用[J].特种铸造及有色合金,2003(05):20-21+66. DOI：

Long Wenyuan Cai Qizhou Wei Bokang Fan Zitian. Application of Numerical Simulation to Eliminate Shrinkage Hole in the Ductile Iron Hub Casting. [J]. Special Casting & Nonferrous Alloys (5):20-21(2003) DOI：

摘要

采用华铸CAE软件对球墨铸铁轮毂的凝固过程进行了模拟。通过模拟优化了铸造工艺

成功地消除了轮毂铸造过程中产生的缩孔、缩松缺陷。模拟结果与实际生产情况符合较好。结果表明 :计算机模拟能为工艺方案的评价和改进提供有效的参考依据。

Abstract

The simulation of ductile iron hub during solidification was conducted by means of Huazhu CAE software. The casting process was optimized by the simulation and the shrinkage hole

shrinkage porosity in the ductile iron hub were eliminated successfully. The simulated results are well in agreement with that of the practical production. The numerical simulation can offer more effective reference for evaluation and improvement of technological scheme.