Design of Die Casting Die for Air-conditioner Swaying Tray of Automobile in Squeezing Casting

Hu Maoliang1  Zhao Mi1  Ji Zesheng1  Pu Yongji2  Sun Guangbin2

Views : 0 下载量: 174 CSCD: 5

Export
Share
Collection
Album

Design of Die Casting Die for Air-conditioner Swaying Tray of Automobile in Squeezing Casting
Issue 3, Pages: 155-157(2005)
Published： 2005 ，
DOI：

扫描看全文

[1]胡茂良,赵密,吉泽升,朴永吉,孙光滨.汽车空调器摇盘挤压铸造模具设计及工艺研究[J].特种铸造及有色合金,2005(03):155-157+126.

Hu Maoliang1 Zhao Mi1 Ji Zesheng1 Pu Yongji2 Sun Guangbin2. Design of Die Casting Die for Air-conditioner Swaying Tray of Automobile in Squeezing Casting. [J]. Special Casting & Nonferrous Alloys (3):155-157(2005)
[1]胡茂良,赵密,吉泽升,朴永吉,孙光滨.汽车空调器摇盘挤压铸造模具设计及工艺研究[J].特种铸造及有色合金,2005(03):155-157+126. DOI：

Hu Maoliang1 Zhao Mi1 Ji Zesheng1 Pu Yongji2 Sun Guangbin2. Design of Die Casting Die for Air-conditioner Swaying Tray of Automobile in Squeezing Casting. [J]. Special Casting & Nonferrous Alloys (3):155-157(2005) DOI：

摘要

选用LD11合金

利用挤压铸造技术生产汽车空调器摇盘

避免了金属压力铸造和普通热模锻技术的不足

满足了摇盘力学性能指标 :σb≥ 2 80MPa ;δ≥ 10 % ;HB为 10 0～ 12 0。通过对汽车空调器摇盘挤压铸造浇注温度、压力、预热和润滑等工艺参数的确定

防止了挤压铸造过程中缺陷的产生

为提高摇盘的性能和成品率提供了依据。

Abstract

The air-conditioner swaying tray of automobile made of LD11 was manufactured by squeezing casting to overcome the demerits in pressure casting and traditional hot-die forging.The mechanical properties of the swaying tray can reach up to σ b≥280 MPa

δ≥10% and HB of 100～120.The defection in squeezing casting was prevented by determining the processing parameters

including pouring temperature

pressure

preheating and lubricant agent

which provides a referrence for improving the properties and product yield of the swaying tray.