Effects of Frequency on Microstructure of 4045 Aluminum DC Casting under Electromagnetic Field

Li Yexin  Cui Jianzhong  Qin Ke

Views : 0 下载量: 222 CSCD: 8

Export
Share
Collection
Album

Effects of Frequency on Microstructure of 4045 Aluminum DC Casting under Electromagnetic Field
Issue 4, Pages: 243-245(2005)
Published： 2005 ，
DOI：

扫描看全文

[1]李业欣,崔建忠,秦克.电磁场频率对电磁铸造4045合金微观组织的影响[J].特种铸造及有色合金,2005(04):243-245+191-192.

Li Yexin Cui Jianzhong Qin Ke. Effects of Frequency on Microstructure of 4045 Aluminum DC Casting under Electromagnetic Field. [J]. Special Casting & Nonferrous Alloys (4):243-245(2005)
[1]李业欣,崔建忠,秦克.电磁场频率对电磁铸造4045合金微观组织的影响[J].特种铸造及有色合金,2005(04):243-245+191-192. DOI：

Li Yexin Cui Jianzhong Qin Ke. Effects of Frequency on Microstructure of 4045 Aluminum DC Casting under Electromagnetic Field. [J]. Special Casting & Nonferrous Alloys (4):243-245(2005) DOI：

摘要

采用低频电磁半连续铸造技术制备40 45铝合金铸坯

比较了常规DC法与低频电磁铸造40 45铝合金圆锭（直径为10 0mm）微观组织的形貌。重点考察在10～5 0Hz范围内

不同的频率使电磁铸造40 45铝合金圆锭微观组织发生的变化。结果表明:电磁场频率显著影响合金凝固的微观组织

当频率由5 0Hz降低到15Hz时

微观组织分布趋于均匀

初晶αAl晶粒尺寸减小

二次枝晶臂减少

共晶Si形貌由条状变为点状

组织得到明显细化。

Abstract

The difference of microstructures of 4045 aluminum alloy ingots with 100 mm in diameter cast by DC and LFEC （low frequency electromagnetic casting） processes was compared.The effects of electromagnetic frequency

ranging in 10～50 Hz

on the microstructure of 4045 aluminum alloy castings were focused on.The results showed that electromagnetic frequency greatly affects the microstructure of as-cast ingot.Uniform microstructure can be obtained and primary α-Al grain size and secondary dendrite are reduced

and eutectic Si phase transformed from bar into point-like with the decrease of frequency from 50 Hz to 15 Hz.