Study on SiC Nanoparticles Reinforced AM60 Magnesium Alloys Fabricated by Semisolid Process

Kang Yonglin Wang Zhaohui

Views : 0 下载量: 145 CSCD: 0

Export
Share
Collection
Album

Study on SiC Nanoparticles Reinforced AM60 Magnesium Alloys Fabricated by Semisolid Process
Issue S1, Pages: 327-329(2007)
Published： 2007 ，
DOI：

扫描看全文

[1]康永林,王朝辉.半固态工艺制备纳米SiC颗粒增强AM60镁合金的研究[J].特种铸造及有色合金,2007(S1):327-329.

Kang Yonglin Wang Zhaohui. Study on SiC Nanoparticles Reinforced AM60 Magnesium Alloys Fabricated by Semisolid Process. [J]. Special Casting & Nonferrous Alloys (S1):327-329(2007)
[1]康永林,王朝辉.半固态工艺制备纳米SiC颗粒增强AM60镁合金的研究[J].特种铸造及有色合金,2007(S1):327-329. DOI：

Kang Yonglin Wang Zhaohui. Study on SiC Nanoparticles Reinforced AM60 Magnesium Alloys Fabricated by Semisolid Process. [J]. Special Casting & Nonferrous Alloys (S1):327-329(2007) DOI：

摘要

使用半固态复合工艺

制备了纳米SiC颗粒增强AM60镁合金材料。利用光学显微镜、布氏硬度计和MTS材料试验机等设备研究了纳米SiC颗粒对镁合金的显微组织、力学性能和硬度等的影响。结果表明

在镁合金中添加纳米SiC颗粒能够细化其组织

提高材料的综合力学性能。当纳米颗粒体积分数加入量为0.1%时

镁合金的综合性能达到最好

屈服强度、抗拉强度和伸长率分别较未添加纳米颗粒的镁合金提高了56.9%、19.2%和69.3%

其硬度和冲击功也分别提高了16.4%和18.8%。同时

对纳米SiC颗粒对镁合金的强韧化机理进行了探讨。

Abstract

The SiC nanoparticles reinforced AM60 magnesium alloys were fabricated by semisolid process.The effects of SiC nanoparticles on microstructure and mechanical properties of AM60 have been investigated by optical microscope

Brinell hardness tester and MTS material testing machine etc.The results show that the microstructure and mechanical properties of magnesium alloys can be improved withthe addition of SiC nanoparticles.In terms of mechanical properties

the optimal addition of SiC nanoparticles is 0.1%.Under this condition

theincrease extent of yield strength

tensile strength

elongation

hardness and impact energyof AM60 magnesium alloys are 56.9%

19.2%

69.3%

16.4% and 18.8% of those of original alloys

respectively.The mechanisms of strengthening and toughening of magnesium alloys with SiC nanoparticles are also discussed.