Preparation of Sub-micon AlN Particulate Reinforced 2618 Alloy Composites

Wang Jianhua1  Su Xuping1  Yin Fucheng1  Li Zhi1  Yin Danqing2

Views : 0 下载量: 74 CSCD: 2

Export
Share
Collection
Album

Preparation of Sub-micon AlN Particulate Reinforced 2618 Alloy Composites
Issue 3, Pages: 167-169(2005)
Published： 2005 ，
DOI：

扫描看全文

[1]王建华,苏旭平,尹付成,李智,易丹青.亚微米AlN增强2618合金基复合材料的制备[J].特种铸造及有色合金,2005(03):167-169+127.

Wang Jianhua1 Su Xuping1 Yin Fucheng1 Li Zhi1 Yin Danqing2. Preparation of Sub-micon AlN Particulate Reinforced 2618 Alloy Composites. [J]. Special Casting & Nonferrous Alloys (3):167-169(2005)
[1]王建华,苏旭平,尹付成,李智,易丹青.亚微米AlN增强2618合金基复合材料的制备[J].特种铸造及有色合金,2005(03):167-169+127. DOI：

Wang Jianhua1 Su Xuping1 Yin Fucheng1 Li Zhi1 Yin Danqing2. Preparation of Sub-micon AlN Particulate Reinforced 2618 Alloy Composites. [J]. Special Casting & Nonferrous Alloys (3):167-169(2005) DOI：

摘要

采用高能球磨的方法制备亚微米AlN +复合熔盐的混合物

并利用搅拌铸造法制备了质量分数为 1%的AlN亚微米（0 .1～ 0 .7μm）颗粒增强的 2 618合金基复合材料。试验结果表明

采用该方法可以使亚微米AlN颗粒均匀地分布在 2 618合金基体中 ;由于强烈的搅拌使 2 618合金中针片状Al9FeNi相变为细小颗粒状

该相大部分分布于晶界。

Abstract

The sub-micon mixture of AlN and compound salt was manufactured by high-energy ball-milling

and the 2618 alloy composites reinforced with 1% sub-micon AlN particulate （0.1～0.7 μm） were fabricated by a stirring casting method.The results showed that the sub-micon AlN particulate can be uniformly distributed into the alloy matrix.Moreover

the needle-like Al 9FeNi phase transform into fine particulate which is mainly distributed in the grain boundary due to the intensive stirring.