Design of Conveyer and Its Application in Magnesium Melt

Xiao Zehui~1; Luo Jirong~2; Wu Shusen~2; Wan Li~2

Views : 0 下载量: 135 CSCD: 4

Export
Share
Collection
Album

Design of Conveyer and Its Application in Magnesium Melt
Issue 2, Pages: 113-114(2006)
Published： 2006 ，
DOI：

扫描看全文

[1]肖泽辉,罗吉荣,吴树森,万里.镁合金熔体输送装置的设计及应用[J].特种铸造及有色合金,2006(02):113-114+63.

Xiao Zehui~1, Luo Jirong~2, Wu Shusen~2, et al. Design of Conveyer and Its Application in Magnesium Melt. [J]. Special Casting & Nonferrous Alloys (2):113-114(2006)
[1]肖泽辉,罗吉荣,吴树森,万里.镁合金熔体输送装置的设计及应用[J].特种铸造及有色合金,2006(02):113-114+63. DOI：

Xiao Zehui~1, Luo Jirong~2, Wu Shusen~2, et al. Design of Conveyer and Its Application in Magnesium Melt. [J]. Special Casting & Nonferrous Alloys (2):113-114(2006) DOI：

摘要

针对镁合金高温熔体易氧化、燃烧的特点

研究开发了容积定量、气压输送

并具有液流止回机构的镁合金高温熔体输送装置。经工厂应用

特别是试生产圆盘状压铸件

结果表明

输送量的平均值标准误差为0.014、方差均值为0.061

输送定量精度达到±5%

能有效地防止镁合金熔体回流、吸气及氧化。

Abstract

Aiming at the easy-oxidation and easy-ignition characteristics of elevated magnesium melt

a conveyer for elevated Mg alloy melt with melt back-brake mechanism was developed

in which gas-pressure delivery and fixed volume were used.The results from producing round plate show that the average standard error is 0.014 and average square error is 0.061 for delivery volume.The delivery precision reaches ±5%

effectively preventing the back-flow of the magnesium alloy melt.